Sheriff Admin Morgue Roof Project

Remove all existing wall, curb flashings and existing walking pads as well as remove / replace existing roof deck in areas that show evidence of dry rot and infill area to match existing roof elevation. Work shall include cleaning and prepping existing substrate to receive new substrate and mechanically attaching ¼” Recovery Board, fully adhering new specified 60 mil PVC roof membrane with new associated sheet metals, new receiver/removable counter flashings at base of metal parapet walls roof area A1, new coping caps, trim, and expansion joints metal. Existing electrical/gas/condensate lines are to be installed at new roof elevations on specified pipe supports if new existing line needs to be raised to properly fit new support height minimum 6” with protection pads. Contractor to remove and properly dispose of existing T-111 siding at vertical parapet walls at area B1 of the County Morgue and install new 36” wide R paneling with non-concealed fasteners as per manufacturers specifications.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.