Similar Projects
Last Updated | 12/15/2020 01:16 PM |
Project Title | Needlepoint Bipolar Ionization |
Physical Address | View project details and contacts |
City, State (County) | Aspen, Breckenridge, Carbondale, Glenwood Springs, Rifle, CO (Garfield, Pitkin, Summit Counties) |
Category(s) | Single Trades |
Sub-Category(s) | HVAC |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Qualified Contractors to furnish all equipment, materials, supplies, labor to install auto-cleaning, needlepoint bipolar ionization equipment. 1. The needlepoint bipolar ionization equipment will be installed in HVAC fan coil units and small furnace units. 2. The needlepoint bipolar equipment must be UL 867 certified and UL 2998 certified. Please include this information in your bid. 3. This project requires needlepoint bipolar ionization equipment sized for 2400 CFM HVAC equipment and 4800 CFM HVAC equipment. 4. A list of the required equipment is below for each location. 5. If the needlepoint bipolar equipment is not design for 24-volt input power (3 phase equipment or 277v single phase equipment), the contractor is responsible for supplying a properly sized transformer for each HVAC equipment. 6. The needlepoint bipolar ionization equipment will require a set of dry contacts (alarm output) that will be wired to the HVAC equipment Building Automation System controller. 7. Detail drawings are attached for wiring to the BAS controllers. 8. Each needlepoint bipolar ionization system must be installed to the manufacture installation, operation and maintenance manual specs. |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |