Y1DA--Replace Expansion Joints

The Vendor shall provide all necessary materials and labor to replace expansion Joints in Bldg. 135,1c 9(8 X16 ), 2c (8 X14 ), 2b (8 X12 ) and 1b new wing (8 X6 ) ;(8 X4 ) ;(10 X6 )3 sections at the VA New Jersey Healthcare System 151 Knollcroft Road Lyons, New Jersey 07939. The material required for the plates is Polyurethane Epoxy. The manufacturer is ICO Polymer. The Vendor will install dust barriers and dust mat s ensuring that no dust interfere normal everyday operations. The Vendor will mobilization and install containment where necessary. The containment is for the glue and other hazmat from the floor tile underlayment. Conditions under the existing flowing are unknown. The Vendor will remove old expansion joint material and any Plates /encumbrances. The Vendor will inspect plates and replace with a standard 1 plate Vendor will clean and surface prep the existing Joints. Vendor will reconstruct the joints as necessary utilizing 100% polymers. Vendor will apply a 100% solids polymer material to bridge the expansion joints and provide a smooth transition for wheeled traffic. Vendor will provide a temporary ramp over the expansion joints until cure for foot traffic. Vendor will warranty all labor and materials for two years. This Statement of Work is only for floor joints. It does not include walls or ceiling joints. This work is in an active corridor and cannot be shut down.

Division 04 -	Masonry, Common Work Results for Masonry, Masonry Accessories, Masonry Control and Expansion Joints.
Division 07 -	Thermal and Moisture Protection, Roof Specialties, Manufactured Roof Expansion Joints.
Division 09 -	Finishes.