Similar Projects
Last Updated | 02/21/2019 09:30 AM |
Project Title | Furnish and Install Fencing |
Physical Address | View project details and contacts |
City, State (County) | Philadelphia, PA (Philadelphia County) |
Category(s) | Single Trades |
Sub-Category(s) | Fencing |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | $25,000 to $100,000 |
Plans Available from | |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | Vendor To Furnish And Install Approximately 400' Of 10' + 1' High Chain Link Fence Including (2) Two 10' Double Drive Gates; -Fabric Shall Be a 1" Mesh -#9 Gauge Wire With a Galvanized Coating -The Weight Of Zinc Per Square Foot Of Wire Surface Shall Be 1.2 Ounces -Line Posts Shall Be 3" o.d. Ss40 Pipe Weighing 3.117 Lbs Per Ft And Spaced a Maximum Of 10' Centers -Line Posts Shall Be Set In 12" Diameter Concrete Footings To a Depth Of 3 Ft. -Terminal Posts Shall Be 4" o.d. Ss40 Pipe Weighing 4.64 Lbs Per Ft. -Terminal Posts Shall Be Set In 15" Diameter Footings To a Depth Of 3 Ft. -The Top Middle Bottom Rails Shall Be 1 5/8" o.d. Ss40 Pipe Weighing 1.86 Lbs Per Ft. -The Top Of The Fence Shall Have 3 Strands Of Barbed Wire Having a Class 3 Zinc Coating -Each Strand Shall Consist Of (2) Two 12 1/2 Gauge Twisted Wire With 4 Point Barbs On 5" Centers -a 18" Diameter Coil Of Razor Ribbon Shall Be Attached Between The Top Strand Of Barbed Wire And The Fence Fabric -Attachment Shall Be On 15" Centers -Install (2) Two Double Swing Gates, 10' + 1' High x 10' Wide To Match Above Fence And Gates -Install Four (4) 4" o.d. Sch #40 Gate Posts Weighing 9.11 Lbs Per Ft | ||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |