Fence Upgrade, Brownwood DHQ and AEM

Site No: 239847 Work of this projects includes demolition of existing chain link fencing and gates as indicated on the drawings. Clear trees, bushes and vines as indicated on the drawings, two feet of each side of fence line where fence line is on TXDOT property. When fence line borders another property, line/fence line clearing to be coordinated with TXDOT project manager. A minimum of 2 foot clearing is required on TXDOT side. Stump grinding of trees, bushes and vines. Comply with local, state and federal ordinances and laws. Furnish and install 9 ga, 6ft chain link fence with top rail and 3 strand barb wires and or associated components as indicated on the drawings. Furnish and install ornamental fencing and associated components. Furnish and install cantilever gates, troughs, gate operators with safeties, safety loops and associated safety devices to comply with UL 325 standards as indicated on the drawings. Furnish and install all required electrical and communication conduit for pedestals and gate operators as indicated on the drawings, field verify and coordinate locations with TxDOT PM. Install TXDOT furnished pedestals, pedestal base, base foundation as indicated on the drawings and specifications. Furnish and provide a utility scan at each site. Refer to the specification requirements. Contractor is responsible to verify all field conditions and dimensions for bidding and installation. Work at entrances shall be performed in a manor or time that will not impede vehicle ingress or egress at entrance. Perimeter fence line must be maintained and property line left secure.

Division 32 -

Exterior Improvements, Fences and Gates.