Sludge Dewatering Screw Press

A. Manufacturer shall furnish and verify installation of one (1) skid mounted sludge dewatering screw press. The screw press shall be manufactured from AISI 304L stainless steel shapes. Fabrication and assembly shall be in conformance with the product specifications and drawings. B. Manufacturer shall furnish a complete dewatering system including skid, screw press, drive motors, gear reducers, support legs, anchor bolts, polymer station, piping and wiring, controls, and all accessories and appurtenances specified or otherwise required for a complete and properly operating installation. C. Owner/Owner’s Designee shall coordinate all details of the equipment with other related parts of the work and shall verify that all structures, piping, wiring, and equipment components are compatible. Owner/Owner’s Designee shall be responsible for all structural and other alterations required to accommodate equipment differing in dimensions or other characteristics from these specifications and drawings. D. Equipment will be installed according to instructions and recommendations of the equipment manufacturer. E. Power supply for main control panel is 460 Volts, 60 Hz, 3-phase. The polymer makedown system needs a separate 120 VAC, 60 Hz, single phase power supply.

Division 46 -

Water and Wastewater Equipment, Residuals Dewatering Equipment.