Cxt Gate House Installation for East Burns Run Public Use Area

PROJECT: CXT GATE HOUSE INSTALLATION FOR EAST BURNS RUN PUBLIC USE AREA, LAKE TEXOMA, BRYAN COUNTY, OK. This acquisition is solicited as 100% small business set-aside. The NAICS Code for this project is 236220, Commercial and Institutional Building Construction, and the size standard is $39.5 million. In accordance w ith FAR 36.204, the magnitude of this construction project is betw een $100,000 and $250,000. The Government point of contact for this requirement is Jon A. Larvick, Contract Specialist (Jon.A.Larvick@usace.army.mil). Please NOTE this solicitation requires offerors to enter a National Institute Standards and Technology (NIST) score in the Supplier Performance Risk System (SPRS) to be eligible for aw ard OFFEROR'S QUESTIONS AND COMMENTS Questions and/or comments relative to the RFQ shall be submitted via Bidders Inquiry (reference instructions below). Any information given to an offeror which impacts the solicitation and/or offer will be given in the form of a publicized question and answer on ProjNet's Bidder Inquiry and/or written amendment to the solicitation. Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet. To submit and review bid inquiry items, an offeror will need to be a current registered user or self-register into the system. To self-register, go to the web page and click on the BID tab. Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e-mail address, and then click login. Fill in all required information and click create user. Verify the information on the next screen is correct and click continue. From this page you may view all bidder inquiries or add an inquiry. Bidders will receive an acknowledgement of their question via e-mail, followed by an answer to their question after it has been processed. The solicitation number is: W912BV22Q0103 The Bidder Inquiry Key is: 2V3ZI3-TIDTPN The bidder inquiry system will close for new inquiries ten (10) days prior to proposal due date to ensure adequate time to form an appropriate response and amend the solicitation, if necessary. Offerors are requested to review the specification in its entirety and review the Bidder Inquiry System for answers to questions prior to submission of a W912BV22Q0103 Page 7 of 61 new inquiry. The bidder inquiry technical help call center operates weekdays from 8AM to 5PM Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals. The point of contacts for this solicitation are: Contract Specialist: Jon A. Larvick Telephone: 918-669-4316 E-mail: Jon.A.Larvick@usace.army.mil Contracting Officer: MAJ Daniel K. Jernigan Telephone: 918-669-7483 E-mail: daniel.k.jernigan@usace.army.mil Note: All questions and/or comments should reach the above referenced Contracting Office no later than ten (10) calendar days prior to the solicitation close date, so they may be given consideration or actions taken prior to receipt of offers. All requests for information must be submitted via ProjNet's Bidder Inquiry (see above). ADDITIONAL INFORMATION Oral explanations or instructions are not binding. Any information given to an offeror which impacts the solicitation and/or offer will be given in the form of a written amendment to the solicitation. This procurement is being conducted in accordance with FAR Part 13, Simplified Acquisition Procedures (SAP) and FAR Part 36, Construction and Architect-Engineer Contracts with award based on price alone. Any reference to offers or bids, or offerors or bidders, should be substituted with quotations or quoters. All reference to discussions shall not be interpreted under FAR Part 15, but rather indicates that the Government may communicate with quoters as allowed under simplified acquisition procedures. QUOTE PREPARATION CHECKLIST DO NOT RETURN THIS CHECKLIST Important items for you to check are included, but not limited to those listed below. This checklist is furnished only to assist you in submitting a proper quote. Do not return the checklist with your quote. SITE VISIT (CONSTRUCTION) (FEB 1995) - ALTERNATE I (FEB 1995) (a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed. (b) An organized site visit has been scheduled for-- 23 Aug 2022 at 10:00am Central (c) Participants will meet at-- 351 Corps Rd. Denison, TX 75020 SCOPE OF WORK These specification and drawings cover requirements for contractor to furnish all materials, labor, and equipment necessary to demo and remove the existing gate house and install a new CXT Schweitzer Gate House located at East Burns Run Public Use Area located on the west side of Cartwright, OK in Bryan County Oklahoma. 1.1.1 (CLIN 0001) - All materials, labor, and equipment necessary to demolish, remove and dispose of existing vault toilet, water treatment facility, existing gate house, asphalt roadway, concrete, fencing, and flower beds and dispose of in accordance with local and state law. 1.1.2 (CLIN 0002) - All materials, labor and equipment necessary to construct pad, place concrete, install electric, plumbing, and sewer stub ups, install new septic system, and install new electric service. 1.1.3 (CLIN 0003) - Provide all materials, labor, and equipment necessary to make final connections of electric, plumbing and sewer utilities, and construct and install cabinetry in gate house. 1.1.4 (CLIN 0004) - Provide all materials, labor, and equipment necessary to fabricate and install new gates and fencing and landscape after construction is complete. 1.2 REFERENCES 1.2.1 - ACI 318, ACI 301 and ACI 306 1.2.2 - ODEQ 1.2.3 - NEC 1.2.4 - U.S. Army Corps of Engineers Safety Manual EM 385-1-1 - Electronic file can be found at: http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx . 1.3 BASIS FOR PAYMENT Partial and Full Payment. 1.4 WORK HOURS Regular work hours will be from 8:00 am - 4:30 pm Monday through Friday, excluding federal holidays. Any proposed changes to the work hours must be approved by the Contracting Officer. 1.5 COMPLETION TIME Work shall be completed within 90 calendar days after receipt of the notice to proceed. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Thermal Insulation, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Entrances and Storefronts, Curtain Wall and Glazed Assemblies, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Acoustical Ceilings, Flooring, Resilient Flooring, Carpeting, Acoustic Treatment, Painting and Coating, Painting.
Division 10 -	Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Partitions, Emergency Aid Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies, Flagpoles.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings, Window Treatments, Casework, Office Furniture, Multiple Seating.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Earthwork Methods, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Planting Irrigation, Turf and Grasses.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.