RFP CMAR (2) - Lockheed Martin Greenville Operations Center

CLARIFICATION: October 16, 2023 (from Owner): clarification to all offerors on the above Request for Proposal. The information provided was conflicting as to the timing of the Cost Proposal envelope. We understand that Section VII.H says that it will be provided at the time of shortlist interviews. However, this was an error. ***The Cost of Services Proposal pursuant to Section VII.H should be provided prior to the consideration for interviews. All offerors may have until 2:00 pm on October 18, 2023 to provide the Cost of Services Proposal referred to in Section VII.H.*** ____________________________________________ It is the intention of the Owner, South Carolina Technology and Aviation Center (SCTAC), to select two (2) CMAR firms to compete for numerous construction projects that support ongoing facility management and modernization. To support facility management and modernization requirements of the Lockheed Martin Greenville Operations Center, SCTAC seeks to enter into a three-year multiple-award, requirements contract (Base Contract) that will allow for design-build, construction, repair, and maintenance projects to be completed on an 'as required' basis, when available funding permits. All projects will be for the improvement of SCTAC real property. This Request for Proposals will result in the selection of two (2) Base Contract awardees. The Base Contract will be a version of the A133-2019 modified to include design-build project delivery, which SCTAC refers to as the Construction Manager At-Risk delivery method, or CMAR, and will establish all of the provisions that run throughout the relationship, such as (1) the contractor's fee; (2) the contractor's compensation for pre-construction services; and (3) how the Cost of the Work is determined. However, each individual project will be the subject of its own 'Work Authorization,' whereby the selected CMAR will perform pre-construction services to assist in the development of the scope of work (such as cost estimating and project planning), followed by the performance of the work pursuant to a Guaranteed Maximum Price (GMP) addendum. Final Date to Submit Questions October 2, 2023. Any inquiries about this RFP must be submitted to both Jay Matthews (jmatthews@hsblawfirm.com) and Brendan Geraghty (bgeraghty@hsblawfirm.com) via email no later than 4:00 pm on October 2, 2023 The estimated total value of projects is $50,000,000.00. Work Authorizations is planned to begin Q1 of 2024. The intended tenant site for improvement 272 acres including 16 hangars, 1.3Msqft of covered space, FAA Part 139 Cat 1 Airfield, 8,000ft runway, and FAA contracted tower. The RFP is available for pick-up at the address below, or Firms may contact Mr. Jay Matthews III at jmatthews@hsblawfirm.com to have the RFP sent to them via e-mail. Please also direct all questions to bgeraghty@hsblawfirm.com. Firms desiring to provide the above services should submit Proposals Responses no later than 2:00pm on October 16, 2023, addressed to: Haynsworth Sinkler Boyd, P.A. Attn: J.W. Matthews III One North Main Street, 2d Floor Greenville, S.C. 29601 jmatthews@hsblawfirm.com

Acre, 272 Acre.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Coiling Doors and Grilles, Entrances and Storefronts, Windows, Special Function Windows, Security Windows, Access Control Hardware, Louvers and Vents.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Ceilings, Resilient Flooring, Carpeting, Acoustic Treatment, Painting.
Division 10 -	Specialties, Visual Display Units, Directories, Signage, Telephone Specialties, Compartments and Cubicles, Toilet Compartments, Emergency Aid Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Lockers, Storage Assemblies, Protective Covers, Flagpoles, Pest Control Devices, Flags and Banners, Security Mirrors and Domes.
Division 11 -	Equipment, Loading Dock Equipment, Loading Dock Bumpers, Stationary Loading Dock Equipment, Portable Dock Equipment, Loading Dock Lights, Foodservice Equipment, Foodservice Storage Equipment, Food Preparation Equipment, Food Cooking Equipment, Food Dispensing Equipment, Ice Machines, Cleaning and Disposal Equipment.
Division 12 -	Furnishings, Art, Casework, Seating.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC.
Division 25 -	Integrated Automation.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Packaged Generator Assemblies, Engine Generators, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting, Lighting Poles and Standards, Parking Lighting, Site Lighting, Walkway Lighting, Flood Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Communications, Distributed Audio-Video Communications Systems, Paging Systems, Public Address Systems, Intercommunications and Program Systems.
Division 28 -	Electronic Safety and Security.
Division 31 -	Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Parking Bumpers, Speed Bumps, Pavement Markings, Tactile Warning Surfacing, Fences and Gates.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.
Division 41 -	Material Processing and Handling Equipment, Conveyors.