Chemical Treatment Injection System Installation for Rowan University

Install 3/8 inch, ASTM A269, 316L seamless & drawn, (0.035 inch wall), stainless steel tubing from a designated chemical pumping station to two (2) separate high pressure steam headers with the utilization of compression fittings. Stainless steel compression ball valves shall be installed at both ends of both tubing runs for system isolation. At the steam header ends of each tubing run and at the pumping station manifold, the connection points will be via stainless steel threaded fittings.

Division 02 -	Existing Conditions, Subsurface Investigation, Geotechnical Investigations, Subsurface Drilling and Sampling.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 -	Metals, Structural Metal Framing, Metal Decking.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping, Instrumentation and Control for Process Systems.