Northeast Water Treatment Plant Improvements

The work includes the following, together with numerous related items of work, all in accordance with the Plans and Specifications: A. Construction of a new process building to house new pressure filters and aerators, including, the repair and reconstruction of existing improvements affected, and the demolition of existing process equipment. B. Demolition of existing process equipment includes the media from the existing aerators, the filter feed pumps, pressure filters, and the backwash waste tank from inside the existing process building. C. A new process building will be constructed to house a portion of the facility improvements. New process equipment includes a backwash wash tank, filter feed pumps, oxygen side stream flash mix, pressure filters, degasifiers, finished water pumps, liquid ammonium sulfate system, LOX system, and vaporizers. D. Alternative Add No. 1 includes the optional construction of an on-site sodium hypochlorite generation system in the existing process building. A Proposal Bond in the amount of not less than 5 percent of the total amount bid, drawn in favor of Willmar Municipal Utilities shall accompany each bid. This project is being funded by the Minnesota Public Facilities Authority (PFA) State Revolving Loan Fund and the Willmar Municipal Utilities, Minnesota. The project is subject to the State of Minnesota and Federal Prevailing Wage Rates, Buy American Iron and Steel Provisions, and other applicable State and Federal requirements as specified. The Owner reserves the right to reject any or all bids and to waive any irregularities and informalities therein and to award the Contract to other than the lowest bidder if, in their discretion, the interest of the Owner would be best served thereby.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Decking, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, Facility Fuel Piping, Facility Fuel-Storage Tanks, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Clearing and Grubbing, Grading, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.