Upgrade Fuel Tanks

Water Department Fuel Tank: Re-locate the existing double wall, above ground, 3,500 gallon split fuel tank from public works to water department. Prior to moving tank install a concrete pad 13' x 29' x 8" thick on 4" of road base, 95% compaction, with #4 rebar every 18" on center, City Staff will excavate the site. Furnish and Install protective bollards around the tank. Connect this fuel tank to an existing tank at the site to integrate the fueling system in order for them to operate as one tank. Public Works Fuel Tank: Furnish and install a double wall, above ground, 9,000 gallon split tank, (6,000 gal gas & 3,000 gal diesel). Exterior painted, interior bare. Tank must meet all Utah and U.S. Governmental standards and regulations. Tank must be UL-142 with NFPA30 rated. Connect new tank to existing fueling system.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 -	Metals, Structural Metal Framing, Metal Decking.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.
Division 33 -	Utilities, Storm Drainage Utilities.