LVL AWTF Inland Injection Well Project Pipeline and Appurtenances

The Project consists of furnishing all labor, materials, equipment, supplies and incidentals required to connect Injection Well LVL-IW-01 to the LVL AWTF Product Water Pump Station and operate the system. The work generally includes, but is not limited to, potholing to verify utility locations, installation and maintenance of BMPs for compliance with storm water pollution prevention plan, furnishing and installation of approximately 280-linear feet of 12-inch diameter 304L stainless steel pipeline, 225-linear feet of 16-inch diameter 304L stainless steel pipeline, associated piping supports, flow control valving, magnetic flow meters, pressure and level transmitters, and water quality analyzers; furnishing and installing well backflush submersible pump and 3R injection control valve; wellhead connections; well vault installation; asphalt/concrete paving; electrical improvements; and programming. Intent to Bid Due Date: May 24th 2023, 11:00 AM PDT Optional Pre-Submission Reviews NA Up to Two Optional Pre-Submission (Pre-Sub) reviews of mandatory bid submittal forms ONLY, not including the bid table, will be made available to Bidders who seek feedback from WRD on the completeness of required bid submission forms that are due at time of Bid. This opportunity is made available to Bidders until 12:00 PM local time on May 3, 2023. See Article 7.03 of 00202 Instructions to Bidders for more details. May 3rd 2023, 12:00 PM PDT No Potential bidders may submit questions until May 17, 2023 at 10:00 AM local time.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Operation and Maintenance of Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Water Utility Pumping Stations, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 34 -	Transportation, Operation and Maintenance of Transportation.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.