N040--Domiciliary WAP Cabling

Quantity Model Description 1 Labor Labor to install Biscuit Jacks, Patch, and Paint 6 PM Project Management ~10000 Cable Cable/Wire Run 1 Cat6 Patch Panel 48 Cat6 Cable Jack 48 Port Biscuit Block 1 3/4 Velcro 1 Cable Ties 100 Cable Hooks 16 Ethernet Extenders 24 1 Sleeve with Fire Stopping 2. Work includes, but is not limited to: Cable Install - Furnish and install forty eight (48) Cat 6 cable drops for WAP's Terminate cables to new 48 port patch panel in IT room and Cat 6 jacks at WAP location Furnish and install Veracity POE extenders where required Furnish two (2) Cat 6 patch cords for each installed WAP Furnish and install 1" firewall sleeves in rated walls Install customer provided WAP's Work Clarifications Cables and wires must be labeled on both ends. Fire Caulking Required for all Fire wall Penetrations. Patient Rooms have no above ceiling access and are in block walls. Quality Control Contractor is responsible for maintaining a clean environment during the installation of the equipment. Upon completion of the project all remaining materials are to be removed or disposed of and existing equipment shall be properly turned in through property management.

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.