Shunt Reactor for Hayden Substation

The Contractor shall furnish the Item No. 0001 shunt reactor as described in this section. These specifications provide the minimum electrical and mechanical requirements for dry type, air core, single-phase shunt reactor, suitable for outdoor use. The shunt reactor shall be in accordance with the latest revision of the Industry Standards stated, including ANSI Standard C57.21and International Standard IEC 289 as applicable, except for any deviations from the Industry Standard as described in these specifications. In the event of contradictory requirements between Industry Standards and these specifications, the terms and requirements of these specifications shall have precedence over the Industry Standards. Each reactor shall be equipped with suitable attachments for lifting and shall be designed for installation outdoors and to be impervious to moisture and other weather hazards. Only new equipment of current and present day manufacture shall be furnished. Each shunt reactor shall be suitable for base mounting, furnished with a supporting structure and hardware to connect reactors to support structures, and be suitable for daily switching. In addition, each reactor shall be Class AA type self-cooled, and suitable for operation at a nominal frequency of 60 hertz.

Electric Substation, New Construction.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Substations, Power Distribution Units, Transfer Switches.
Division 31 -	Earthwork, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Fences and Gates.