Belcher Road Bridge Replacement Project

The Work is for the construction of the Belcher Road Bridge Replacement Project. The construction of a 100-foot long single span bridge on Belcher Road over Lawsons Fork Creek. Included shall be all beams, foundations, piles, end bents, retaining walls, traffic control, clearing, grubbing, grading, erosion control, seeding, stabilization and other appurtenances necessary for the construction of a new bridge and road project. The new bridge will be about 5 feet horizontally downstream from the existing bridge and about 9 feet higher in elevation than the existing bridge. The project will include approximately 1150 feet of new road construction with approximately 12,000 cubic yards of borrow to raise the new road and new bridge elevation to meet new flood elevation standards.

Bridge, New Construction.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.