Burrville/East Grass Valley Lop and Scatter

Within all areas except Area B (18 acres) all pinyon, rocky mountain juniper, Utah juniper (Cedar), shall be cut. 100% Removal. Trees shall be completely severed from the stump(s) where no live limbs shall be left on the stump of cut trees. All main branches or stems shall be cut from the trunk of the tree to meet scattering requirements. Area B Totaling 18 acres: Tree with less than 12 inch DBH are to be cut. Additional treatment specifications for all areas: 1. Leave all trees containing raptor nests or nesting cavities. 2. Leave all deciduous trees and shrubs including bitterbrush, cliffrose, mahogany untreated. 3. Do not exceed stump height of 8” (inches) within rocky areas, all other stump heights will be 4”- 6” measured on the uphill side. 4. Lop and scatter cut material so that slash height does not exceed 24” (inches) above the ground. 5. Cut material left on site shall not exceed 48” (inches) in length. 6. Leave cut debris below crossings or culverts where possible to dissipate the energy of water flow. 7. Use established roads and trails for all motorized travel to minimize damage to patches of sagebrush and other browse plants. 8. Trees identified as bearing trees, or any tree blazed or tagged to mark the line of any Government survey, shall not be cut or destroyed under penalty of the law. Trees with reference tags will be left uncut

Division 32 -

Exterior Improvements, Operation and Maintenance of Exterior Improvements, Irrigation, Planting Irrigation, Planting, Planting Preparation, Soil Preparation, Landscape Grading.