RFQ- C1DA--Enclose Covered Walkway Drive-Thru B82 515-24-103

36C25023R0148 - 515-24-103 Enclose Covered Walk Drive-Thru B82 VAMC Battle Creek, MI Page 2 of 8 PRE-SOLICITATION NOTICE (REQUEST FOR SF330s) The Department of Veterans Affairs (DVA) Network Contracting Office 10 is seeking qualified Architect -Engineering (AE) firms to submit Standard Form 330 (SF330) Architect / Engineer Statement of Qualifications for architectural and engineering (AE) services for the project 515-24-103 Enclose Covered Walk Drive-Thru B82. Firms submitting qualification packages must comply with Federal Acquisition Regulation (FAR) 52.236.25 Requirements for Registration of Designers whereby Architects and Engineers must be registered to practice in the particular professional field involved in a State (the full text of the clause can be read at acquisition.gov). Architects and Engineers performing work on projects must be registered in the State of Michigan (the laws of the State of Michigan regarding registration of architects and engineers applies). Also see geographic location and office location restrictions in paragraph 7.g. of this notice. The Scope of Work for this project is as follows: 2.1. Provide complete Architectural and Engineering (A/E) design services, including all necessary 15% Conceptual Design, 35% Schematics, 65% Design Development Documents, 95% Construction Documents, 100% Bid Documents, a Final Release for Construction (RFC) set of documents, cost estimates and construction period services (CPS) for solicitation to co-locate facility support functions in the Medical Center Campus. The work is located at the VA Battle Creek Healthcare System, 5500 Armstrong Rd, Battle Creek, MI 49037. 2.2. The primary objective of this project will be to infill both arches in the covered walk between buildings 39 and 82, install automatic sliding doors in each infill and reconfigure Shafter Circle North between buildings 4 and 82 to install parking on the building 4 side of the road while still leaving the access drive to Building 4. Finally, remove Shafter Circle North roadway adjacent to both sides of the covered walk and add a greenspace and sidewalk. 2.3 The Architect/Engineer shall provide design services necessary to furnish: Schematics, Design Development, Construction Documents, Technical Specifications, Construction Period Services, Site Visits, Cost Estimates, As-Built Documentation, and all other related information for Project 515-24-103 Enclose Covered Walk Drive-Thru B82, at the VA Medical Center in Battle Creek, Michigan. SET-ASIDE INFORMATION: This procurement is a Total Set-Aside for Service-Disabled Veteran Owned Small Business (SDVOSB) AE firms. The primary North American Industry Classification System (NAICS) Codes is 541310, Architectural Services. Verification of SDVOSB status will be done via confirming current registration in the Center for Veterans Enterprise Vendor Information Pages database (vip.vetbiz.gov) upon receipt of the SF 330. Firms submitting a qualification package must also have a current registration in the System for Award Management (www.sam.gov). The awarded contract will be firm-fixed price. This procurement will be following the procedures established in the Brooks Act, Federal Acquisition Regulation (FAR) 15, FAR 36.6, and Veterans Affairs Acquisition Regulation (VAAR) 836.6. The selection process will be made using a two-stage process. Stage I consists of the initial evaluation of the SF-330 s and determination of the highest rated firms. The highest rated firms will then be short-listed and invited to continue with Stage II of the selection process. All firms not short-listed will be notified at this time. Stage II consists of Interview/Oral Presentations for the short-listed firms and selection of the top ranked firm to receive the solicitation for pricing and conduct negotiations. Stage I: Firms responding to this notice will be evaluated and ranked using the selection criteria listed below. The factors are listed in descending order of importance. The evaluation will consider how each factor is addressed to coincide with the selection criteria. The evaluation factors listed below shall be addressed in Part H of the SF-330. 5.1 Professional qualifications necessary for satisfactory performance of required services: The qualifications of the individuals which will be used for these services will be examined for experience and education and their record of working together as a team. The specific disciplines which will be evaluated are Architects, Engineers, Estimators, CAD operators and Project Managers. All key personnel for whom resumes are pro-vided shall be shown on the organizational chart in Section D of SF 330, Part 1. Specialized Experience: Describe specialized experience and technical competence in the type of work required, including, experience in energy conservation, pollution prevention, waste reduction, and the use of recovered materials. 5.2 Past Performance: Describe past performance on contracts with Government agencies and private industry in terms of cost control, quality of work, and compliance with schedules. Offerors will be evaluated on past performance with Government agencies and private industry in terms of work quality, compliance with schedules, cost control, and stakeholder/customer satisfaction. Evaluating past performance and experience will include information provided via the Contractor Performance Assessment Reports System (CPARS) for projects listed in Section F of the SF330 as well as any other pro-jects contained in the database and may include review of information obtained via customer inquiries, other Government databases, and any other relevant other information available to the Government. 5.3 Construction Period Services: Include professional field inspections during the construction period, review of construction submittals, support in answering requests for in-formation during the construction period, and support of construction contract changes to include drafting statements of work. The general workload and staffing capacity of the design office which will be responsible for the majority of the design and the ability to accomplish the work in the required time will be evaluated. 5.4 Management Plan: Describe the firm s general project management philosophy, including the approach that will be used to meet the needs of the scope while controlling the schedule and budget. Include a description of the proposed communication plan between project leadership, the design team, subconsultants, and the Government. 5.6 Firm s Capacity: Describe the firm s ability to accomplish the work in the required time commensurate with the scope of work, including existing workload that may limit AE's capacity to perform project work expeditiously. 5.7 Identify and describe the extent of your firm s commitment to the use of Service-Disabled Veteran-owned small businesses, Veteran-owned small businesses, and other types of small businesses as subcontractors/consultants. 5.8 Geographic Location: Location in the general geographical area of the project. Driving distance time shall be calculated and measured using the Google Maps (maps.google.com) directions tool by entering the working office address as the starting point and the medical center address. The resulting Best Route travel distance, which is determined to be within (200) miles, shall be the official calculation for the purposes of this factor to determine if the two-hour travel time requirement is met. A printout of the results shall be attached to the SF330 qualification package. The working office location must be listed in the SF 330 application and must also be registered in the System for Award Management (SAM www.sam.gov). Working office locations not registered in SAM shall result in the entire SF330 submission being deter-mined as not having met the requirements of this pre-solicitation announcement and will not be considered. Stage II: The shortlisted firms will be invited to present their qualifications in person to the Evaluation Board. Additional criteria will be provided to these firms, and they will be given approximately ten (10) calendar days to prepare for their Interview Presentations. After the Interview Presentations are concluded the firms will be evaluated and the top-ranked firm will be selected, sent a Request for Proposal, and subsequent negotiations to follow. Award selection will be made based on the results of the Interview Presentations only and not the SF-330 qualifications from Stage I. The submission must include a fully completed Standard Form (SF) 330, Architect/Engineer Qualifications (form is available on-line at http://www.cfm.va.gov/contract/ae.asp). The SF330 shall not exceed a total of 50 pages in a common font, size 11 or 12, single spaced. Use graphic presentations where such use will contribute relevant data. The background color of each page of the submission shall be white or ivory stock only. A page is defined as each face of an 8.5 X 11-inch sheet of paper containing information. Deliver via US Mail, FedEx, UPS, etc. (or hand-deliver) the original SF330 and three (3) copies to Department of Veterans Affairs, Network Contracting Office 10, located at the Domino Farms Office Complex, 24 Frank Lloyd Dr. Suite M2200 (Conference Room), Ann Arbor, MI 48105), Attn: Contract Specialist Angelo.Vivio@va.gov. The emailed file(s) size shall not exceed 20mb. The emailed SF330 may be provided in a zip file. The subject line of the e-mail should read 36C25023R0148 Enclose Covered Walkway Drive-Thru B82 SF330 ). DEADLINE: The original and three (3) copies of the SF330 must be received at the address cite above by no later than 25 July 2023 in order to be considered. Questions and other inquiries are to be directed only via email to Contracting Specialist Angelo D. Vivio at Angelo.Vivio@va.gov. NOTES: THIS PRE-SOLICITATION NOTICE IS SUBJECT TO AMENDMENT. MONITOR THIS ADVERTISEMENT AND SUBSCRIBE TO SAM.GOV TO INSURE NOTIFICATION OF ANY AMENDMENTS OR OTHER CHANGES TO THIS ADVERTISEMENT.

Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways.