South Fork Regional WWTP ATAD & UV Additions (Electrical) Project

The Project consists of two (2) Contracts that include but are not limited to the following Work: Contract 2023-01(General):Contractor shall furnish all materials, equipment, supplies, and labor required for the construction of a new Autothermal Thermophilic Aerobic Digestion (ATAD) System, including two reactor basins, a biofilter basin, and an equipment building with pumps, blowers, a drum thickener, and other necessary appurtenances, a new Ultraviolet Disinfection (UV) System, including a new UV disinfection channel, equipment, and building, and all associated piping, appurtenances, and site work necessary to integrate the new facilities in with the existing WWTP. Contract 2023-02(Electrical):Contractor shall furnish all materials, equipment, supplies, and labor required for the electrical facilities associated with Contract 2023-01.The project is located inSouth Fork, Cambria County, PA. Not less than the minimum salaries and wages as set forth in the Contract Documents must be paid on this project in accordance with the provisions of the U.S. Department of Labor, Wage, and Hour Division under the Davis-Bacon and related Acts. Prior to the award of the contract, the successful bidder shall furnish a satisfactory Performance Bond and a Labor and Material Payment Bond to the Owner, in the form contained in the Contract Documents and executed by a satisfactory circular 570 listed surety, each equal to 100% of the total contract amount. The Owner reserves the right to reject any or all Bids, including without limitation, nonconforming, nonresponsive, unbalanced, or conditional Bids. Owner also reserves the right to waive all minor informalities not involving price, time, or changes in the Work Question Deadline 01/03/2024 Biddershallsubmit all questions about the meaning or intent of the Bidding Documentsto Engineer in writing. Contact information and submittal procedures for such questions are as follows: A. Name: Stephen M. Sewalk, P.E., & Thomas Kakabar, Project Manager B. Email: ssewalk@eadsgroup.com & tkakabar@eadsgroup.com C. Address: The EADS Group, Inc., 227 Franklin Street, Suite 300, Johnstown, PA 15901

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.