Halo 2.5 Smart Sensors Installed at Meigs Middle School, Meigs High School and Meigs North and South

Install HALO Smart Sensors in Ceiling of identified locations. Installation is based on the Smart Sensors being mounted in the current ceiling tiles at a height of approximately 8 feet off the ground. HALO Smart Sensors should be located on a ceiling for the purpose of Air Quality and Vape Detection and should be in an area relatively free of air currents. Avoid HVAC exhaust or return ducts, fans, and areas near the door between two rooms. HALO mounting should avoid areas with significant background noise or vibration. In the event mounting requires adapting poles or additional mounting materials not including in the quote then additional pricing will need to be calculated. Install Cabling (Cat 6 with PoE) for HALO Smart Sensor Vape detectors. The HALO unit requires a wired network connection (Ethernet) which includes standard 802.3af PoE power. This connection should not be longer than 300 ft (100M). This will be done in conjunction and under the supervision of the Meigs County Schools Technology Department. The company installing must also provide configuration of HALO Smart Sensors.

Division 27 -	Communications, Common Work Results for Communications.
Division 28 -	Electronic Safety and Security, Common Work Results for Electronic Safety and Security.