Secondary Clarifier No. 2 Rehabilitation Project

The work to be performed consists of but is not limited to: rehabilitation of Secondary Clarifier No. 2 at the STPUD Wastewater Treatment Plant including mechanical, structural, electrical, and instrumentation improvements. This includes demolition of the existing sludge collector mechanism and replacement with a new sludge collector mechanism and appurtenances; seismic retrofits and rehabilitation of the existing concrete tanks; replacement of existing secondary clarifier handrail and V-notch weirs; installation of new density current baffles; demolition and replacement of existing RAS piping; new clarifier drive in existing MCC; integration of new sludge collector mechanism controls to the PLC; and site civil improvements including excavation, grading, and paving as required to accommodate new improvements. Major materials have already been procured by the District such as the sludge collector mechanism, baffles, covers, and weirs. This project is being funded, in part, by the California Clean Water State Revolving Fund (CWSRF) Program. The Contractor will be required to comply with State and federal contract rules and regulations including requirements for Disadvantaged Business Enterprise (DBE) and American Iron and Steel (AIS) as detailed in Sections 00_74_00 and 00_75_00 of the Specifications. The prime contractor is required to provide documentation that the local U.S. Small Business Administration (SBA) and/or the Minority Business Development Agency (MBDA) of the U.S. Department of Commerce were notified of the contracting opportunity at least thirty (30) calendar days prior to the bid opening date. A bid will be considered non-responsive unless it includes the forms required in Section 00_75_00 to be completed and submitted with the Bid. Special Notices Response Format Electronic Project Type Bid Type of Award Lump Sum License Requirements Class A Contractor License Liquidated Damages Yes, Refer to Bid Documents Estimated Bid Value $1,839,750.00 Bid Bond 10.00% Payment Bond 100.00% Performance Bond 100.00% Online Q&A Yes Q&A Deadline 03/21/2023 4:00 PM (PST)

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Operation and Maintenance of Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 34 -	Transportation, Operation and Maintenance of Transportation.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.