Forest Grove Armory Bldg 1002 Reroof

The work in general consists of providing all material, labor and equipment necessary to replace all existing roofing, insulation, flashings, parapet coverings, gutters and downspouts for the entire roof system for building number 1002. The single Point of Contact "POC" for all questions regarding the ITB, forms, Specifications, Plans, bidding process, changes, clarifications, requests for brand approval, substitution requests, the award process, protests and any other issues that may arise is Name: Sam Goff - CPPB Phone: 971-355-4167 E-mail: samuel.a.goff.nfg@army.mil The project includes but is not limited to the removal and replacement of the existing standing seam metal roof, insulation, gutters, and down spouts at the Forest Grove Armory Building 1002. This ITB is advertised as a "Bid Solicitation" in the Oregon Buys web-based eProcurement system. See ITB section C.1.6 - Oregon Buys for information regarding vendor registration and terminology used in Oregon Buys platform. o This document must be viewed electronically to access files, forms, provisions or other documents provided via hyperlinks within this ITB. Prospective Bidders that do not have compatible software or are unable to open any of the attached documents, forms or Addenda may contact the Purchaser listed in Oregon Buys for alternative electronic formats or hard copies. The following range is a project estimate for bonding purposes only: $100,000.00 to $120,000.00. Drawings are diagrammatical; dimensions take precedence over scale, and the Contractor shall verify all dimensions and ensure that all contents of the drawings are covered. For example, at times Electrical may be included in the Mechanical section or Mechanical may be in the Architectural section. If an item in Architectural or Mechanical requires a circuit, then it shall be the responsibility of the Contractor to include the coordinate the disciplines for a complete and usable facility. Items not indicated in the Statement of Work, specifications, and drawings that can be legitimately and reasonable inferred to complete the work must be furnished by the Contractor as though it were detailed herein. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.