Force Main Service Connection

The existing force main connection installed at 4560 U.S. Highway 1, Melbourne, Florida was installed without approval from Utility Services and was not installed in compliance with Brevard County Utility Services Criteria for Water and Sanitary Sewerage Systems within Brevard County. This project will replace the existing connection with an approved and properly constructed connection. 1. Demolish concrete pads and covers from existing corporation stops. 2. Excavate to existing HDPE force main pipe and connection saddles. 3. Remove existing brass saddle and corporation stop from existing HDPE force main. 4. Furnish and install three (3) 304-SS pipe saddle clamps with 2” outlet on existing HDPE force main. 5. Furnish and install three (3) 2” RW threaded gate valves with 2” operating nut. 6. Furnish and install three (3) 461-S CI valve boxes with lids stamped “Sewer”. 7. Furnish and install three (3) repair couplings to reconnect PVC pipe to new valves. 8. Restoration of all areas disturbed during construction and existing.

Division 03 -	Concrete, Precast Concrete.
Division 33 -	Utilities, Sanitary Sewerage Utilities, Sanitary Utility Sewerage Piping, Sanitary Utility Sewerage Force Mains, Sanitary Utility Sewerage Structures.