Similar Projects
Highway and/or Bridge Design and Engineering Services
Design
Less than $80,000,000 est. value

A/E Services For The Risk Management Center Which Includes Projects Within The United States And Its Territories For Dam And Levee Safety And Other Work As Assigned To Usace
Design
$15,000,000 est. value

Architect-Engineering (AE) Indefinite Delivery Contract (IDC) in Support of the Defense Health Agency (DHA) and Component Medical Commands
Bidding
Less than $45,000,000 est. value
Washington, DC

Architect-Engineering (AE) Indefinite Delivery Contract (IDC) in Support of the Defense Health Agency (DHA) and Component Medical Commands
Bidding
Less than $45,000,000 est. value
Washington, DC

C--A-E IDIQ for Facilities Maintenance and Sustainment Support and Engineering work predominantly in the NAVFAC AOR Worldwide
Post-Bid
Less than $90,000,000 est. value

C--A-E IDIQ for Facilities Maintenance and Sustainment Support and Engineering work predominantly in the NAVFAC AOR Worldwide
Post-Bid
Less than $90,000,000 est. value

N62470-17-R-4010 Professional Services supporting NAVFAC AOR with a concentration of work in the Continental United States, the Caribbean, Europe, Africa, and South Western Asia
Results
Less than $45,000,000 est. value

C--IDIQ Contract for Architect-Engineer Services for Design and Engineering Services for Industrial Type Facilities Located Throughout the Naval Facilities Engineering Command AOR, Worldwide
Results
Less than $95,000,000 est. value

A&E IDIQ Northeast Area
Design
$1,000 to $45,000,000 est. value

Architect and Engineering Services for Production Technical Services (PTS) for FEMA's Risk MAP Program
Bidding
$10,000 to $300,000,000 est. value

C--Commissioning Authority (CXA) Services for the EPA
Post-Bid
$25,000 to $100,000,000 est. value

C--IDIQ Contract for A/E Work for Multimedia Environmental Compliance Engineering Support for Navy, Marine Corps, and Other DOD Installations, and Federal Agencies
Results

Indefinite Delivery Indefinite Quantity Architectural-Engineering Contracts
Design

Indefinite Delivery/Indefinite Quantity (IDIQ), Multi-Discipline Architect-Engineer (A-E) Services for Facilities Primarily Located In Maine, New Hampshire, Connecticut, Rhode Island, New York, New Jersey
Bidding
$2,000,000 to $10,000,000 est. value

Design, Engineering, Construction, and Technical Services for installation/relocation of Radiation Portal Monitors
Post-Bid

Last Updated 03/17/2020 10:37 AM
Project Title

Flowing Seawater Laboratory Renovation and Infrastructure Upgrades

Physical Address View project details and contacts
City, State (County) Walpole, ME 04573   (Lincoln County)
Category(s) Laboratory, Professional Services
Sub-Category(s) Architectural, Engineering, Laboratory
Contracting Method Competitive Bids.
Project Status Results
Bids Due View project details and contacts
Estimated Value
Plans Available from
Owner View project details and contacts
Architect View project details and contacts
Description

The project, partially funded by the US Department of Commerce, through an Economic Development Administration (EDA) grant, is located at the Flowing Seawater Laboratory (FSL) building at the Darling Marine Center (DMC) in Walpole ME. The base Scope consists of three components. The first is a new land-based pump house and seawater intake infrastructure to replace the existing dock-based pumping system. The second is selective renovation of the FSL to improve its seawater research capabilities. The third is the electrical and plumbing improvements to support the new renovation improvements and supply services to the new dock being constructed under a separate contract. This project has the following alternatives, if necessary, listed in the order for which they are to be applied: Deduct/Alternate #1: New 800 amp Building Feeder – See Section 01 23 00 for complete scope. Deduct/Alternate #2: New Heat Pump Station – See Section 01 23 00 for complete scope. Deduct/Alternate #3: New Seawater Heating System – See Section 01 23 00 for complete scope. Deduct/Alternate #4: New Hayward Bag Filter System – See Section 01 23 00 for complete scope.

Details

Division 03 - Concrete, Concrete Forming, Cast-in-Place Concrete.
Division 04 - Masonry, Unit Masonry.
Division 06 - Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 - Thermal and Moisture Protection.
Division 08 - Openings, Doors and Frames, Windows, Vents.
Division 09 - Finishes, Tiling, Flooring, Resilient Flooring, Painting.
Division 10 - Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies.
Division 11 - Equipment, Laboratory Equipment.
Division 12 - Furnishings, Specialty Casework, Laboratory Casework, Countertops, Laboratory Countertops, Institutional Furniture, Laboratory Furniture.
Division 21 - Fire Suppression, Fire-Suppression Sprinkler Systems, Fire-Extinguishing Systems.
Division 22 - Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Facility Water Distribution, Plumbing Equipment, Drinking Fountains and Water Coolers, Gas and Vacuum Systems for Laboratory and Healthcare Facilities, Compressed-Air Systems for Laboratory and Healthcare Facilities, Vacuum Systems for Laboratory and Healthcare Facilities, Gas Systems for Laboratory and Healthcare Facilities, Chemical-Waste Systems for Laboratory and Healthcare Facilities, Processed Water Systems for Laboratory and Healthcare Facilities.
Division 23 - Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, HVAC Fans, Central HVAC Equipment.
Division 26 - Electrical, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents