Wastewater Treatment Facility

Chisago Lift Station, Andrews, SCADA and WWTF Improvements: This project is financed using a loan from the Minnesota Public Facilities Authority. Contractors shall comply with all loan requirements. Prevailing wages are required. In general, the Project shall consist of the following major tasks for the Sanitary Sewer District Facilities: Chisago City Lift Station 1 LS Modifications to existing Chisago City lift station. 1 LS Furnish and Install new control panel at Chisago City Lift station. 1 LS Modifications to existing generator at Chisago Lift Station. 1 LS Remove and replace valves ion existing valve vault. 1 LS Electrical service modification from 240 volt to 480volt service, temporary wiring as required for modifications. 2 EA Re-wire existing 240 volt pumps to function on 480volt service. 1 EA Re-wire existing generator from 240 volt to 480volt output. 1 LS Temporary conveyance required to complete valve vault modifications. Andrews Lift Station 1 LS Modifications to existing Andrews lift Station. 1 LS Furnish and Install new control panel at Andrews City Lift station. 1 LS Remove existing generator and furnish and in stall new generator. 2 EA Remove and replace existing pumps with larger pumps on new 480volt service. 1 LS Remove and replace valves ion existing valve vault. 1 LS Temporary conveyance of wastewater required to complete valve vault and wet well modifications. WWTF Effluent Pump Replacement 1 LS Removed existing skid mount effluent pump system and replace with specified effluent pump system. SCADA Modifications 1 LS Replace specified telemetry and control equipment at the following additional sites. Stacy Lift Station, Co. Road 22 Lift Station and Co. Road 84 Lift Station. Along with miscellaneous site and utility improvements, removals, restoration and correlated appurtenances.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 14 -	Conveying Equipment.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.