Fort Randall - Powerhouse Flowmeters

**Notification of Delay and Possible Cancellation of the Requirement** Based on recent information discovered, the government has made the decision to place this procurement on hold for a period of 30 days. The government will be evaluating the scope of work and how it affects the ongoing Major Unit Rehabilitation project that is ongoing. The intention of this notice is to stop the bidding process to reduce any impact on prospective bidders until a decision to move forward or to cancel the requirement can be determined. If it is determined that this requirement will be cancelled, you will be notified in writing. If it is decided to proceed, an Amendment will be issued, and a new Bid Due date will be established. A decision will be made NLT 25 May 2023. All PROJNET inquiries will remain open until a decision is made. As always, the government appreciates you interest in supporting hydropower requirement and we hope to have a decision as soon as possible. Any questions or concerns with this decision, shall be directed to Daniel Monahan in writing at daniel.d.monahan@usace.army.mil Fort Randall Dam SD Installation of Pow erhouse Flow meters This solicitation and resulting contract are utilizing a Tw o-Step Sealed Bidding procurement method as described in FAR Part 14.5. This is Step-One w hich is a request for technical proposals only. Bid bonds are NOT required to be submitted w ith the Step-One technical proposal. Bid Bonds ARE REQUIRED to be submitted w ith the Step-Tw o sealed bid. THIS SOLICITATION IS UNRESTRICTED AND OPEN TO BOTH LARGE AND SMALL BUSINESS All plant, material, equipment, and labor to supply new insertion type and insertion / retractable type electromagnetic flowmeters and ancillary materials including but not limited to valve assemblies, piping, insulation, power wiring, conduits, transformers, and relays for various sized raw water piping serving power generating unit cooling system coils (generator air coolers, upper /lower wear rings, and packing glands) on Unit #1 thru Unit #8. STEP-ONE TECHNICAL PROPOSAL INQUIRIES AND QUESTIONS Technical inquiries and questions relating to this solicitation shall be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org. To submit and review inquiry items, prospective offerors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. A prospective offeror who submits a comment/question will receive an acknowledgement of their comment/question via email. Another email to the same address will notify the prospective offeror once the reply is available for viewing. ***Please Note: Offerors shall only submit one (1) question per inquiry. All inquiries containing multiple questions may be rejected. Please review all previous inquiries to limit redundant inquiries. The Project ID is: FR00103 Project Name: FR Powerhouse Flowmeters Installation Bidder Inquiry Key: 77E9UF-MU537B Instructions for first-time ProjNet Bid Inquiry Access: a. From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. b. Identify the Agency. Select agency USACE. c. Key. Enter the Bidder Inquiry Key listed above. d. Email. Enter the email address you would like to use for communication. e. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Concrete Forming and Accessories, Concrete Reinforcing, Cast-in-Place Concrete, Structural Concrete, High-Performance Structural Concrete, Concrete Finishing, Specialty Placed Concrete, Precast Structural Concrete, Precast Concrete Specialties.
Division 04 -	Masonry, Unit Masonry, Concrete Form Masonry Units.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Specialty Doors and Frames, Access Doors and Panels, Coiling Doors and Grilles, Windows, Hardware, Glazing.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 10 -	Specialties, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Safety Specialties, Emergency Aid Specialties, Fire Protection Specialties, Exterior Specialties, Security Mirrors and Domes.
Division 11 -	Equipment, Parking Control Equipment, Loading Dock Equipment, Security Equipment.
Division 13 -	Special Construction, Radiation Protection, Special Instrumentation, Seismic Instrumentation.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Special Purpose Lighting, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Electronic Surveillance, Video Surveillance, Electronic Personal Protection Systems, Electronic Detection and Alarm, Fire Detection and Alarm, Radiation Detection and Alarm, Fuel-Oil Detection and Alarm.
Division 31 -	Earthwork, Grading, Earthwork Methods, Soil Treatment, Soil Stabilization.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Fuel Distribution Utilities, Electrical Utilities, Electrical Utility Transmission and Distribution, Utility Substations, Utility Transformers, High-Voltage Switchgear and Protection Devices, Medium-Voltage Utility Switchgear and Protection Devices, Communications Utilities.
Division 41 -	Material Processing and Handling Equipment, Conveyors, Cranes and Hoists.
Division 46 -	Water and Wastewater Equipment.
Division 48 -	Electrical Power Generation, Common Work Results for Electrical Power Generation, Instrumentation and Control for Electrical Power Generation, Electrical Power Generation Equipment, Electrical Power Generation Testing.