Roof Replacements KCTCS Gateway Community & Technical College Various Locations

Edgewood Campus (Career Center Building) a. Remove existing roof membrane system, skylight and curb down to existing roof deck. Infill skylight opening with new steel framing and decking. Install 2-Ply SBS Modified Bituminous Membrane Roofing system over ridged layer insulation, tapered insulation where indicated and cover board insulation. Provide crickets where indicated. Raise concrete scupper openings where indicated. b. Lighting & Drywall: Modify existing drop ceiling for new drop ceiling, sprinkler and lighting systems. 2. Urban Campus (TIE Building) a. Remove existing roof membrane systems down to existing roof decks. Install 2-Ply SBS Modified Bituminous Membrane Roofing system over ridged layer insulation, tapered insulation where indicated and cover board insulation. Provide crickets where indicated. Install new coping caps, gutters, downspouts, etc. b. Re-point, clean and seal masonry as indicated. 3. Urban Campus (Pro. Services Building) a. Re-point, clean and seal masonry as indicated. b. Re-work scupper for proper drainage 4. Boone Campus (C.A.M. Building) a. Remove loose foil at flashings and overlay new foil faced flashings. b. Re-flash roof drains w/ liquid applied flashing. c. Re-seal pitch pockets w/ pourable sealer 5. Boone Campus (C.A.T. Building) a. Remove loose foil at flashings and overlay new foil faced flashings. b. Re-flash roof drains w/ liquid applied flashing. c. Re-seal pitch pockets w/ pourable sealer d. Repair coping cap joints 6. Boone Campus (Bookstore) a. Remove loose foil at flashings and overlay new foil faced flashings. b. Patch fish-mouth in cap sheet 7. Edgewood (Transportation) a. PVC Roof Overlay The Division of Engineering and Contract Administration, Commonwealth of Kentucky, reserves the right to reject any and all bids and to waive all informalities and/or technicalities where the best interest of the Commonwealth may be served. Estimate: $2,167,500.00 Estimated Length of Project: 180 (Substantial Completion) + 30 (Final Completion) All bids shall be accompanied by a bid guarantee (in the form of a bid bond or certified check) of not less than five (5%) percent of the amount of the lump sum base bid. A 100% Performance Bond and a separate 100% Payment Bond shall be furnished by the successful bidder. All bonding and insurance requirements are contained in the Instructions to Bidders and/or General Conditions. Bonds should be executed by a surety company authorized to do business in the Commonwealth of Kentucky.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.