RFQ D/B - Design-Build Services for the Cafeteria Building at the Albuquerque Job Corps Center

As of December 20, 2022, further details regarding design and construction have not been identified. *The previous solicitation is listed below for reference. The US Department of Labor, Office of Job Corps Acquisition Services, has a requirement for a qualified firm to provide design and construction services for a new cafeteria building at the Albuquerque Job Corps Center in Albuquerque, New Mexico. THIS IS A SOURCES SOUGHT NOTICE. In accordance with Federal Acquisition Regulation (FAR) 10.002(b) (2) (i), this notice is issued for the purpose of conducting market research. Market research is being conducted to determine if there are potential businesses with the capacity and experience to perform the required work. This Notice is not to be misconstrued as an Invitation for Bid or Request for Proposal. There is no solicitation at this time. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. The full extent of the work will be described in the solicitation, which may follow at a later date. However, a summary of the services to be performed is provided as follows. The work involves design-build services for the design and construction of a new Cafeteria building at the Albuquerque Job Corps Center. The cafeteria building will total approximately 11,600 gross square feet and accommodate three meals served daily. The work includes the design and construction of a new Cafeteria building complete with kitchen, kitchen equipment, serving line and equipment, dining room, support spaces, and loading dock. Also included in the work is civil and site work which will include, but is not limited to, miscellaneous site improvements in the form of general landscaping, roads, parking, drainage, loading dock access, and connection to all utility lines and site/security lighting required for the new cafeteria building. The estimated price range is between $5,000,000 and 10,000,000. Firms interested in this requirement are requested to submit a statement of qualifications. Your statement of qualifications shall demonstrate the capacity of your firm to perform the services described above, and should include the following information: 1. Previous projects of similar scope and value A. Contractor has completed two or more projects that are similar scope to work required under this project with a $5M to $10M constructed value within the last five years. Provide previous project examples that include the location of the project (City, State), the project owner, and a brief and concise description of the project scope. 2. Project Location A. Contractor has completed two or more projects in the region of the country the project is located in the last five years indicating familiarity with local conditions and subcontracting community. The projects should be similar in scope and in value to work required under this project. 3. Project schedule, safety, and quality of work A. Contractor has a proven record of excellent performance by completing projects on or ahead of time. Using the previous project examples include the Contract Award/NTP date, the original contract completion date, and the actual contract completion date for each project. B. Contractor has established Safety and Quality Control procedures and protocols, which are consistently applied to all projects. 4. Financial Capabilities Contractor is in sound financial standing with no claims or liens. Contractor has sufficient financial capacity to bond a project in the $5M to $10M range. Provide aggregate and per project bonding capacity limits. Your project examples shall include the location of the project, the project owner, a brief description of the services performed. Your synopsis should also include the date of contract award, the original and final date of contract completion. Using the previous project examples indicate the original contract price and final contract value. The government will evaluate market information to ascertain potential market capacity to 1) provide services consistent in scope and scale with those described in this notice and otherwise anticipated; and 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements. Your submission should not exceed 10 pages. Your response to this notice, is due no later than April 19, 2022, by 2:00 PM EDT, and shall be submitted via email to Martrelle Pyatt Harvin, Contract Specialist, US Department of Labor/OASAM/OSPE/JCAS, A&E Construction, pyattharvin.martrelle@dol.gov. HUB Zone, veteran-owned small businesses, service- disabled veteran-owned small businesss, small disadvantaged businesses, 8(a) businesses and large businesses are encouraged to submit responses. The NAICS Code for this requirement is 236220. The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

11,600 SF.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Entrances and Storefronts, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Acoustical Ceilings, Resilient Flooring, Painting, Exterior Painting, Interior Painting.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet Compartments, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers.
Division 11 -	Equipment, Refrigerated Display Equipment, Foodservice Equipment, Foodservice Storage Equipment, Refrigerated Food Storage Cases, Walk-In Coolers, Foodservice Shelving, Food Cooking Equipment, Food Dispensing Equipment, Soda Fountain Equipment, Ice Machines, Cleaning and Disposal Equipment.
Division 12 -	Furnishings, Countertops, Furnishing Accessories, Waste Receptacles, Rugs and Mats, Entrance Floor Mats and Frames, Site Furnishings, Trash and Litter Receptacles.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers, Drinking Fountains.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution, Ventilation Hoods, Commercial-Kitchen Hoods.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Power Distribution Units, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting, Lighting Poles and Standards, Parking Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Audio-Video Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection.
Division 31 -	Earthwork, Site Clearing, Grading, Earthwork Methods, Soil Treatment.
Division 32 -	Exterior Improvements, Operation and Maintenance of Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Planting.
Division 33 -	Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Sanitary Sewerage Utilities.
Division 34 -	Transportation, Operation and Maintenance of Transportation.