Similar Projects
New SCADA System - City of Sea Isle City
Renovation
Conception
$1,000,000 CJ est. value
Sea Isle City, NJ 08243

Miscellaneous Building Rehabilitation
Renovation
Bidding
$10,150,000 CJ est. value
East Orange, NJ 07017

Morris Lake Water Treatment Plant (WTP) Chemical Room Rehabilitation
Renovation
Bidding
$268,000 CJ est. value
Newton, NJ 07860

Supervisory Control and Data Acquisition (SCADA) System Replacement and Upgrades
Renovation
Sub-Bidding
$300,000 CJ est. value
Woodbury, NJ 08096

Bar Screen Upgrades
Renovation
Post-Bid
Wanaque, NJ

Furnishing and Delivering Sodium Hypochlorite
Term Contract
Post-Bid
Long Branch, NJ

Replacement and Upgrade of the 480V Synchronizing and Controls for Three (3) Existing Cogeneration Enginators (Cogens) at the Northern Water Pollution Control Facility
Renovation
Results
NJ 08723

Pump Station PS 16 Wet Well Catwalk and Slide Gates Replacement
Renovation
Results
Toms River, NJ 08753

Low Lift Pump Station, Control House and Old Administration Building Stone Pointing and Waterproofing
Renovation
Construction
$260,000 CJ est. value
Wanaque, NJ 07465

Water Pollution Control Facility - Disc Filters
Renovation, Infrastructure
Construction
$1,067,000 CJ est. value
Livingston, NJ 07039

Levine Reservoir Water Tanks Phase I
New Construction, Infrastructure
Pending Verification
$45,000,000 CJ est. value
Paterson, NJ 07501

Suez Water New Jersey Treatment Plant
New Construction, Infrastructure
Pending Verification
$1,000,000 CJ est. value
Franklin Lakes, NJ 07417

Energy Resilience Bank (ERB) Black Start Project
Renovation
Bidding
$300,000 CJ est. value
Little Ferry, NJ 07643

PFAS Removal Treatment System - Phase 2
Renovation
Post-Bid
Newton, NJ

Stage V - Miscellaneous Wastewater Treatment Plant Improvements
Renovation
Results
$974,118 est. value
NJ

Last Updated 02/13/2023 04:31 PM
Project Title

Upgrade to Ringwood Acres Wastewater Treatment Facility

Physical Address View project details and contacts
City, State (County) Ringwood, NJ 07456   (Passaic County)
Category(s) Sewer and Water
Sub-Category(s) Sewage Treatment Plant
Contracting Method Competitive Bids
Project Status Bidding, Construction start expected May 2023
Bids Due View project details and contacts
Estimated Value $600,000 [brand] Estimate
Plans Available from Civil Engineer - 12/19/22
Owner View project details and contacts
Architect View project details and contacts
Description

For Upgrade to Ringwood Acres Wastewater Treatment Facility The work shall start on MAY 1, 2023 and, shall be completed within 233 consecutive calendar days from the start date. Bidders are required to comply with the requirements of N.J.S.A.10:5-31 et seq. and N.J.A.C.17:27. In addition, bidders are notified that they must pay the prevailing wage rate as determined by the "New Jersey Wage Act, Chapter 150 of the Laws of 1963", extension effective July 1974. Also required, in compliance with P.L. 2004, c.57, is proof of business registration as evidenced by a copy of a Business Registration Certificate issued by the N.J. Department of the Treasury, Division of Revenue. In compliance with N.J.S.A. 34:11-56.48, the "Public Works Contractor Registration Act", all contractors bidding on this project must be registered with the NJ Department of Labor and proof of registration is required at the time of bid submission. The character and amount of bid security to be furnished by the bidder is stated in the "Instructions to Bidders" contained elsewhere in these specifications. No bid may be withdrawn within sixty days after the scheduled time for the receipt of bids. The Mayor and Council of the Municipality reserves the right to waive any informality in or to reject any or all bids as may appear to the best interest of the Municipality. Requirements describing in general the complete electrical equipment, removals, installation, temporary wiring, permanent wiring, testing, and placing in service that is required for the upgrade of the existing Ringwood Acres Wastewater Treatment Facility (WWTF) located in Borough of Ringwood, NJ as indicated on the Plans and as required by the Specifications.

Details

Division 02 - Existing Conditions, Subsurface Investigation.
Division 03 - Concrete, Precast Concrete.
Division 04 - Masonry, Unit Masonry.
Division 05 - Metals, Structural Metal Framing, Metal Fabrications.
Division 06 - Wood, Plastics, and Composites, Rough Carpentry.
Division 07 - Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 - Openings, Doors and Frames, Windows, Hardware.
Division 09 - Finishes, Painting and Coating.
Division 10 - Specialties, Signage, Compartments and Cubicles, Emergency Aid Specialties, Fire Protection Specialties, Storage Assemblies.
Division 11 - Equipment, Laboratory Equipment.
Division 14 - Conveying Equipment.
Division 21 - Fire Suppression, Fire-Extinguishing Systems.
Division 22 - Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 - Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 - Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 - Communications, Structured Cabling, Data Communications, Voice Communications, Distributed Audio-Video Communications Systems.
Division 28 - Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 - Earthwork, Earthwork Methods.
Division 32 - Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 - Utilities, Water Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 44 - Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents