Shakers Testing Facility – Castleman

- Demolition: electrical, plumbing, roof penetrations - New electrical and IT to support the Shakers - Facade modification - louvers - New roof penetrations. - Acoustical separation - Concrete work, exterior/interior - Landscape, transformer pad, electrical connection to the building - The electrical building infrastructure has to be upgraded: the service, transformer and feeders will need to be upgraded. - Heating for the space would remain as it presently exists. - Outdoor air will be brought into the space to make-up the air exhausted by the shaker exhaust fans. A fixed blade outdoor air louver with an 18-inch deep intake plenum and low-leakage motorized damper assembly will replace the upper-most row of existing fixed windows on the north wall; above the operable windows and below the arched windows. - Cooling needs will require adding 1 fan coil unit fan room only. Alternatively localized cooling will be provided at each shaker system and a remote grade-mounted condensing unit located in the northeast corner of the building - Alternatively additional spot cooling to relieve “concentrated” high temperatures created by the shaker equipment is considered.

1 College/University, to 3,500 SF New Construction, Buildings.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 03 -	Concrete, Cast-in-Place Concrete.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.