Hampden Bridge Bundle/Design-Build - Design and Construction of Eight Replacement Bridges

Design and construction of eight (8) replacement bridges carrying Interstate 95 Northbound and Southbound in Hampden, Maine between Exit 174 and Exit 180. Interpreting boring data and geotechnical evaluation. • Planning and evaluation of supplemental geotechnical investigations as necessary. • Performing hydrology/hydraulic/scour analysis as required. • Providing utility and railroad coordination and accommodation. • Providing any additional survey needed beyond that which is provided by the Department. • Preparing any amendments to environmental permits required due to the Design-Builder’s design, and/or during construction due to the Design-Builder’s construction operation and submitting them to the Department. Bridge Numbers: 5951, 1433, 5950, 1432, 5949, 1431, 5969, 1430 Project Numbers: STP-2173(000), STP-2173(010),STP-2172(800), STP-2172(810), STP-2172(900), STP-2172(910), STP-2167(310), STP-2167(300)

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.