Roof at the Ducktown Courthouse

**As of September 13, 2022, no bids received. No definite date for the rebid.** The rafters will be 2x6 spruce on 24 inch centers. The lath will be 2x4 spruce on 24 inch centers. Any plates will be 2x6 pressure treated. All stiff legs & rake wall framing will be 2x4 spruce. Rafters will be braced up with 2x4 spruce sitting on 2x6 pressure treated plates. Metal will be 29 gauge for the roof & the walls. Flashing will be 29 gauge 12 inches wide over all & bent at 6 inches. Metal will be screwed every 4 feet. The lower part of the roof will be hipped on the two corners & the main body will be on a 4x12 pitch that sheds to the rear of the building. There will be three inches of metal overhanging out past the roof edge. The wooden framing will stop at the edge of the existing roof & only the metal will stick over. The plates around the outside edges of the roof will be fastened down every 8 feet & all the framing will be nailed together with (#16) or 3 inch long nails which will be galvanized. Any bids over $25,000 will need to be turned in by a licensed Contractor. The County reserves the right to accept and or reject any or all bids or bidders, in part or whole based on the County's evaluation of what is in the best interest of the County.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.