High School Parking Lot Lighting Improvements

To remove the current lights and light poles along with installing new lights, 4 – 25-foot steel light poles, and light pole bases. 1.Remove existing (6) lot lights from the existing wood poles in the lot 2.Remove existing (6) wood poles and make existing wiring safe. 3.Locate and tie into existing pole light feed at the north end of the high school parking lot 4.Trench in conduit from the tie in location to the north fence of bus parking 5.Provide and install 4 new pole bases 6.Provide and install 4 new 25 foot steel poles 7.Install four of the six current parking lot light fixtures onto the new steel poles 8.All necessary permits and inspection fees 9.Installed poles should match the light pole at the north end of the parking lot as closely as possible 11.After removal of old poles, remaining holes are filled with stone 12.Submit suggested layout of the poles demonstrating the newly installed lights fully light the parking lot

Division 26 -

Electrical, Lighting, Exterior Lighting, Lighting Poles and Standards.