Roof Replacement at Bellerive Senior Living Apartment Complex

Scope of Work: A. Remove and properly dispose of existing roofing, insulation, and sheet metal down to the existing concrete deck. B. Remove and reinstall lightning protection system. C. Remove metal edge flashing. D. Remove abandoned equipment, curbs, and/or penetrations and repair the metal roof panel system. E. Install wood nailers at perimeters, curbs, and penetrations. F. Install tapered polyisocyanurate and secondary insulation set in low-rise foam adhesive, and apply a fully adhered reinforced thermoplastic single-ply membrane. G. Install new single ply membrane flashings at penetrations, curbs, perimeter walls, and rise walls. H. Install new sheet metal coping and edge flashings. I. Raise, lower, or modify all utility lines, piping, equipment, or other items which affect the installation of the new roof system. J. Raise all curbs, equipment, etc., as necessary to achieve a minimum flashing height of 8-inches (200mm) above the finished roof.

Division 07 -

Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.