Similar Projects
Tank Replacement at Jefferson Patterson Park and Museum
Bidding
Less than $100,000 est. value
Saint Leonard, MD 20685

Maryland State Police Barrack "A" Waterloo Tank Replacement
Bidding
$500,000 to $1,000,000 est. value
Jessup, MD 20794

Industrial Park Elevated Storage Tank Recoating
Post-Bid
Princess Anne, MD 21853

Underground Storage Tank Repairs 2019
Post-Bid
Baltimore, MD 21201

Cliffton Water System Improvements - Elevated Storage Tank
Results
Newburg, MD 20664

Salt, Brine, and Anti-Icing or De-Icing Agents, and Brine Production and Storage Systems
Results

Tank Replacement at Maryland State Police Mchenry Barrack
Bidding
Less than $100,000 est. value
McHenry, MD 21541

World-Wide Water Storage Tank Remediation
Term Contract
Post-Bid

Equalization Tank Replacement - Riddle Farm Wastewater Treatment
Results
Ocean Pines, MD 21811

Richfield Station Hydropillar Water Storage Tank
Bidding
Chesapeake Beach, MD

4,000 Gallon Storage Tank for Blue Juice Lavfluid
Post-Bid
Andrews Air Force Base, MD 20762

City Hall Underground Storage Tank Abandonment
Term Contract
Results
Less than $9,000 est. value
Hagerstown, MD 21740

Underground Storage Tank Abandonment
Results
Less than $9,000 est. value
Hagerstown, MD 21740

10,000 Gallon Hydro Pneumatic Water Tanks
Results
MD

Ballast Tank Preservation
Results
Baltimore, MD

Last Updated 06/22/2020 09:05 AM
Project Title

3MG Reservoir Painting and Miscellaneous Repairs

Physical Address View project details and contacts
City, State (County) Bowie, MD 20716   (Prince Georges County)
Category(s) Sewer and Water
Sub-Category(s) Storage/Water Tanks
Contracting Method Competitive Bids.
Project Status Results
Bids Due View project details and contacts
Estimated Value
Plans Available from
Owner View project details and contacts
Architect View project details and contacts
Description

The work consists of the reservoir and pit piping recoat, repaint and miscellaneous repairs as specified in the plans and specifications, which includes, but is not limited to the following: Exterior: High pressure water clean (5,000 to 10,000 psi) spot power tool clean to a SSPC-SP11 standard and apply a three (3) coat epoxy urethane system. Replace the caulking at the baseplate. Wet Interior: Abrasive blast clean to a SSPC-SP10 near-white metal standard and apply a three (3) coat zinc epoxy system. The cathodic protection system is to be removed, and reinstalled by the owner’s vendor, coordination and payment is the contractor’s responsibility. Pit Piping: Abrasive blast clean to a SSPC-SP6 commercial standard and apply a two (2) coat epoxy system. Foundation: Water clean and apply a two (2) coat epoxy system. Repairs: 1) Replace the manway gaskets 2) Replace roof stiffeners – contingency

Details

Division 02 - Existing Conditions, Subsurface Investigation.
Division 03 - Concrete, Concrete Reinforcing, Cast-in-Place Concrete.
Division 05 - Metals, Structural Metal Framing, Metal Decking.
Division 09 - Finishes, Painting.
Division 23 - Heating, Ventilating, and Air Conditioning (HVAC), Facility Fuel Piping, Facility Fuel-Storage Tanks.
Division 31 - Earthwork, Clearing and Grubbing, Grading.
Division 32 - Exterior Improvements, Fences and Gates.
Division 33 - Utilities, Storm Drainage Utilities.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents