T-7A Ground Based Training System (GBTS) Facility at Laughlin AFB

The Fort Worth District Corps of Engineers is soliciting comments from the construction community addressing the potential use of Project Labor Agreements (PLAs) for the Construction of T-7A Ground Based Training System (GBTS) Facility at Laughlin AFB, TX Range of Magnitude: Between $25,000,000 and $100,000,000 Some of the factors that may be considered regarding their use are: a.) The involvement of multiple contractors and/or subcontractors working in multiple crafts or trades. b.) The complexity of the project. c.) Shortage of skilled labor in the region. d.) Completion of the project will require an extended period of time. e.) The use of PLA's on other comparable projects. f.) The promotion of the Governments long term programs interests such as training of skilled workforce for future projects. g.) The possibility of labor disputes that threaten timely completion. h.) Additional costs from use of PLAs may be cost prohibitive. PLA is defined as a Pre-Hire collective bargaining agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S.C. 158(f). Federal Acquisition Regulation, (FAR), Policy: a.) Project Labor Agreement, (PLA), is a tool that agencies may use to promote economy and efficiency in Federal Procurement. Pursuant to Executive Order 13502, Agencies are encouraged to consider requiring the use of project labor agreements in connection with large-scale construction projects. b.) An Agency may, if appropriate, require that every contractor and subcontractor engaged in construction on the project agree for that project to negotiate or become party to a project labor agreement with one or more labor organizations if the Agency decides that the use of project labor agreements will: 1.) Advance the Federal Government's interest in achieving economy and efficiency in Federal procurement, produce-labor management stability and ensure compliance with laws and regulations governing safety and health. Equal opportunity, labor and employment standards and other matters and... 2.) Be consistent with law. Reference Provision: 52.222-23 Notice of Requirement for Project Labor Agreement Clause 52.222-34 Project Labor Agreements. In consideration of the above factors and any others which may be deemed appropriate, the construction community is invited to comment on the use of PLA's. Of particular interest to the Government are responses to the following questions: a.) Should PLA's be executed on selected large dollar contracts within the San Antonio area. What other factors should the Corps of Engineers consider before deciding to include PLA provisions in a Fort Worth District contract. What type of project should or should not be considered for the utilization of a PLA. b.) Is the use of PLA's effective in achieving economy and efficiency in Federal procurement. What is the estimated relative cost impact or any other economies or efficiencies derived by the Federal Government if using PLA's. Will a PLA impact the cost of submitting an offer. c.) Is the use of PLA's effective in producing labor-management stability. Have labor disputes or other labor issues contributed to project delays in the local area. d.) Is the use of PLA's conducive to ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards and other relevant matters. Are there instances where these standards have not been met on Federal contracts in the local area. Were PLA's used for those specific contracts. e.) Projects will require multiple construction contractors and/or subcontractors employing working in multiple crafts or trades. Do you foresee any work on projects that may result in both prime contractor and at least one subcontractor or two or more subcontractors employing the same trade. f.) Are there concerns by prime contractors on the availability of skilled construction labor. Information may reference current apprenticeship statistics and workforce age demographics. g.) Completion of anticipated projects will require an extensive performance period. Will a PLA impact completion time. What is the anticipated volatility in the labor market for the trades required for the execution of the project. Would a PLA benefit a project which contains a unique and compelling mission-critical schedule. h.) Where have PLA's been used on comparable projects undertaken by Federal, State, Municipal or private entities in the San Antonio area. i.) Will the use of PLA's impact the ability of potential offerors and/or subcontractors to meet the Small Business utilization goals. Please provide your comments via email ONLY to: Ms. Stella Morales, email: stella.i.morales@usace.army.mil no later than 1000 am CDT on 15 March 2023. The method of contractor selection has not been determined at this time. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 03 -	Concrete, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Insulation, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Metal Doors and Frames, Wood Doors, Plastic Doors, Specialty Doors and Frames, Entrances and Storefronts, Entrances, Curtain Wall and Glazed Assemblies, Windows, Hardware.
Division 09 -	Finishes, Plaster and Gypsum Board, Tiling, Acoustical Ceilings, Flooring, Resilient Flooring, Carpeting, Acoustic Treatment, Painting.
Division 10 -	Specialties, Visual Display Units, Signage, Compartments and Cubicles, Toilet Compartments, Partitions, Fire Protection Specialties, Fire Protection Cabinets, Fire Extinguishers, Storage Assemblies, Flagpoles.
Division 11 -	Equipment, Audio-Visual Equipment.
Division 12 -	Furnishings, Window Treatments, Casework, Rugs and Mats, Office Furniture, Seating, Multiple Seating.
Division 21 -	Fire Suppression, Fire-Suppression Sprinkler Systems, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Plumbing Piping, Facility Water Distribution, Facility Sanitary Sewerage, Facility Storm Drainage, Plumbing Equipment, Plumbing Fixtures, Drinking Fountains and Water Coolers.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Piping and Pumps, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Power Distribution Units, Lighting, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Communications Equipment Room Fittings, Communications Backbone Cabling, Data Communications, Voice Communications, Audio-Video Communications.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Fire Detection and Alarm.
Division 31 -	Earthwork, Site Clearing, Grading, Soil Treatment.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Planting Irrigation, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.