Pier Water and Sewage Repairs

Pier water and sewage repairs: - Repair water supply pipe from ground to gangway underside approximately 7' with new cut off valve (Current Valve is split open) removing excessive connections (3 Connections). Install ¾" garden hose style connection between supply valve and cam-lock fitting. - Install cam-lock hose (hose shall meet Potable water use regulations) and connections from supply pipe to underside of gangway. - Pressure test Sewage pipe assembly mounted to underside of gangway and repair if leak found. Condition of pipe is unknown due to insulation and length of time not in service. - Install water supply cam-lock end fitted flexible hose (hose shall meet Potable water use regulations) from gangway to floating pier pipe. - Replace Sewage Cam-Lock flex hose from gangway to pier - Replace complete sewage piping on pier with like kind material (PVC) and fittings to include: one way check valve, end clean out opening, cam-lock attachment fitting both ends, drain valve below gangway end. - Repair heat trace, has broken section where water line disconnected at floating pier flex hose, requires repairs and test and operational test of entire water supply line heat trace. - Conduct pressure test of complete sewage line run once all repairs and connections are complete. - Conduct pressure test of complete water supply run once all repairs and connections are complete.

Division 03 -

Concrete, Precast Concrete.

Division 33 -

Utilities, Instrumentation and Control for Utilities, Water Utilities, Water Utility Distribution Piping, Water Utility Distribution Equipment, Disinfecting of Water Utility Distribution, Water Utility Storage Tanks, Sanitary Sewerage Utilities, Sanitary Utility Sewerage Piping, Sanitary Utility Sewerage Force Mains, Sanitary Utility Sewerage Structures, Storm Drainage Utilities, Storm Utility Drainage Piping, Storm Utility Water Drains, Storm Drainage Structures.