Similar Projects
Reported | 04/09/2021 12:00 AM |
Project Title | Wood and Palm Frond Chipper |
Physical Address | View project details and contacts |
City, State (County) | FL (Pinellas County) |
Category(s) | Single Trades |
Sub-Category(s) | Equipment |
Contracting Method | Competitive Bids. |
Project Status | Request for Quotations |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | County Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | 1. Chipper is Self-Powered with a 18HP, KEY START Vanguard Gas Engine. 2. Chipper is Self-Propelled with a 6.5HP Pull Start Vanguard Gas Engine. 3. 4" Tall x 12" Wide Throat Opening. 4. The Chipper Drum with 2 Embedded Blades 5. Double Sided Drum Blades Reduces Time Required Between Sharpening's 6. Drum Is 6" X 12" Wide. 7. Hopper is 18" Tall x 20" Wide x 42" Deep to Blades. 6. With Chipper on the Ground, it's 42" to Bottom of Hopper Feed Shelf. 8. Chipper is 65" from Grade to the Tip of Deflector. 9. Tracks are 7.25" Wide x 36" Long. 10. Tracks are Operated with Forward and Reverse Levers (One on each Handle) and Drive Engage Lever at Left Handle. 11. Transmission has 3 Forward and 1 Reverse Speed, with Clutch Free Manual Lever Selection. 12. Outside to Outside of Tracks is 26" - This is Widest Point of Chipper. Overall Length of Chipper Is 7'. 13. Length is from End of Handles to Deflector (folded down). 14. Total Weight: 814lb's (Less Pailet/Crating, etc.). 15. Cutting Head Weight: 53Ib's |
||
Details |
|
||
Bidder's List | View project details and contacts | ||
Prospective Bidders | View project details and contacts | ||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |