Buckland Industries

Plugging, Drilling, Re-drilling and Site Restoration at the Buckland Industries Well in Saint Clair County.Prepare location, including calling MISSDIG, removing Buckland sign and flagpole, along with sidewalk near the wellhead. The roof overhang and cinder block wall extension will need to be removed by licensed contractor, prior to startup. Carefully excavate around wellbore and install cellar. If well casing is present, make necessary welds and connections to prepare BOP. Ensure H2S safety equipment is onsite. Kill well as necessary. Clean out wellbore with appropriate bit and jetting tools to estimated total depth (TD) of 600'. If necessary, cement in new section of surface casing pipe, preferably 100' below base of drift (BOD estimated at 100'). If casing exists, run a cement bond log from TD to surface. Use bond log information to determine if free pipe can be pulled. Pull free pipe. Under static conditions, cement wellbore from TD to surface using a 50/50 POZ mixture, with gas block cement additive. WOC 4 hours and tag. If necessary, add enough cement to bring it up to 4' below surface. Cut off casing string(s) at least 4' below grade, weld 1/2 " steel plate on casing, with permit number on plate. Restore location as per OSC direction. The roof and wall extensions will not need to be re-installed.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 31 -	Earthwork, Grading, Earthwork Methods.
Division 33 -	Utilities.