Munitions Storage Magazines

Provide a complete and usable ammunition storage magazines complying with the following: 2.1. Quantity: 2 2.2. Size: 40 feet long, 8 feet wide, 8 feet tall (each) 2.3. Type: Type 2 ammunition/explosives storage magazine. Meet or exceed US Government specification NSWC 3046-93-1 2.4. Includes: Full lightning protection system, grounding rods, anchor brackets and bolts, steel divider walls, electrical panel and distribution system, door systems with cam closers, explosion resistant interior and exterior lighting, entrance ramps, flooring, and shelving. 2.5. Electrical Connection Locations: As shown in the drawing below, the panel for the East magazine shall be located 21.5 feet plus or minus 1 foot from the magazine edge, and the panel for the West magazine shall be 7 feet plus or minus 1 foot from the edge. The West panel shall have a 20 amp breaker and a bottom knockout for an existing lighting circuit. 2.5.1. Provide and install conduit and wire for connection between East and West magazine electrical panels. The East magazine shall be connected to base power.

Warehouse/Storage, New Construction.

Division 03 -	Concrete.
Division 08 -	Openings, Metal Doors and Frames, Access Doors and Panels, Entrances, Storefronts, and Curtain Walls, Windows, Door Hardware.
Division 09 -	Finishes, Flooring.
Division 26 -	Electrical, Lighting, Interior Lighting.