Rogers Bridge at Chattahoochee River - Pedestrian Bridge

Work includes construction of a pedestrian bridge over the Chattahoochee River at the location of the abandoned Rogers Bridge Road steel truss bridge. The proposed 16.5-foot wide bridge will consist of a 228- foot main steel truss span with 40-foot end spans, for a total length of 308-feet. Concrete multi-use trail approaches will connect each end of the bridge to the Cities of Duluth in Gwinnett County and Johns Creek in Fulton County. Also included in the work is the replacement of a 30-inch water main, which transitions from 30- inches on each side of the bridge to three 18-inch water mains tucked underneath the bridge.

Division 01 -	General Requirements, Vehicular Access and Parking, Traffic Control, Temporary Barriers and Enclosures.
Division 03 -	Concrete, Concrete Reinforcing, Precast Structural Concrete.
Division 05 -	Metals, Structural Steel Framing, Structural Steel for Bridges, Steel Joist Framing, Steel Joist Girder Framing.
Division 07 -	Thermal and Moisture Protection, Expansion Control.
Division 09 -	Finishes, High-Performance Coatings.
Division 10 -	Specialties, Signage, Traffic Signage.
Division 26 -	Electrical, Exterior Lighting, Lighting Poles and Standards, Roadway Lighting.
Division 31 -	Earthwork, Embankments, Erosion and Sedimentation Controls, Slope Protection, Gabions, Riprap, Special Foundations and Load-Bearing Elements, Driven Piles.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Fences and Gates, Retaining Walls.
Division 34 -	Transportation, Bridges.