Concrete Pad replacement and Concrete Sidewalk and Pad

Project Description - Fire Department Apron Improvements 1. The city of Culver, Oregon is planning a construction project to remove an existing concrete pad and bollards from the west side of Culver City Hall in front of the fire department bays. 2. A new concrete pad would then be installed in compliance with specifications. 3. Re-install all (10) bollards at the corners of the roll-up doors. 4. The project will include connecting to an ODOT highway. 5. The city has funding to begin this project upon bid award from prospective contractors. 2. Specifications: o Remove deteriorated concrete apron (80' X 33') on west side of fire station o Remove and re-install 10 bollards at corners of roll-up doors. o Slab(s) need to be 8" thick o #4 rebar, grid tied at 18" centers. (suspended) o Base to consist of a minimum of 6" of 3/4 minus base (compacted) o Rated Pressure - Equal to or greater than 4000 psi. o Slope - 14" slope for the 33' apron. (Slope 14" from the fire hall towards the west to the highway.) o Traffic control to ODOT standards shall be provided by contractor.

Division 03 -	Concrete, Cast-in-Place Concrete.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Asphalt Paving, Rigid Paving, Concrete Paving, Curbs, Gutters, Sidewalks, and Driveways.