Emergency Repairs, Residential Homes - 1908 21st Street South

SECTION A - ROOFING 1) Trim all greenery away from roof structure a minimum of four (4') feet. 2) Remove existing roofing and roofing components to bare wood. Removal and replacement of up to 160 s.f. of decking (any type). MUST be included in roofing proposal. NOTE: Any wood replacement over 160 s.f. of any type MUST be verified by change order, R.O. and a material receipt. Any new wood which is exposed MUST be primed and painted. 3) Materials requirement: (a) Install new dry-in materials, secondary water barrier, fasteners, lead boots, pitch buckets, metal valley and flashing. (b) Install new drip edge which must be a minimum of 2 ½" face and 3" back onto roof. (c) Install 1" x 2" edging with pressure treated wood or redwood under drip edge. (exception: not required when using Aluminum, Vinyl or vinyl coated aluminum soffit and fascia). (d) When installing new Aluminum, Vinyl or vinyl coated aluminum soffit or fascia, the drip edge or gravel stop MUST match. (e) Install ridge vent where possible. No mechanized venting systems allowed. SECTION B - GUTTERS / DOWNSPOUTS / SPLASH BLOCKS If specified, a complete system includes gutters, hangers, down spouts, straps, elbows, splash blocks, etc. Contractor must specify material to be installed. SECTION C - VENTILATION 1) Foundation: Vents - use 8" x 16" aluminum units or pressure treated wood fame with 1/4" x 1/4" hardware cloth and attach with screws. 2) Access Panels: Use pressure treated wood frame, latched, with 1/4" x 1/4" hardware cloth. 3) Soffit Vents: Use a minimum 18 x 16 aluminum or fiberglass mesh.

Single-Family Homes, Renovation.

Division 02 -	Existing Conditions, Demolition, Selective Demolition, Selective Interior Demolition.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Flooring, Painting and Coating.
Division 21 -	Fire Suppression.
Division 22 -	Plumbing.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Lighting.