Kitchen Remodel Government Owned Housing

This contract covers a service agreement that meets or exceeds the requirements covered herein and detailed in section below. 1. Vendor/tech is to physically do an onsite visit, take measurements of kitchens, and provide a design/layout. Contractor shall make all reasonable efforts to ensure that cabinet layout and design provide for to elimination of all “void/dead” space and provide efficient space utilization, including cabinet and drawer space. 2. Vendor/tech is to procure all needed parts to include but not limited to cabinets, sinks, moldings, hardware, spacers and counter tops. Style/finish shall in accordance with section 1.4. 3. Prep surfaces for install. 4. Dry fit cabinets to determent electrical, ventilation, and plumbing cut outs. Note: top island/pop out cabinets for unit 03 will not need to be replaced/installed “see attachments”. 5. Cut all holes for electrical, ventilation, and plumbing. 6. Install cabinets, all moldings, spacers, and hardware. 7. Ensure proper operation. 8. Caulk and seal all seams and openings as needed. 9. Install counter tops and back splash. 10. Cut opening for kitchen sink and install. 11. Caulk and seal all seams and openings

Single-Family Homes, Renovation.

Division 03 -	Concrete, Concrete Forming and Accessories, Precast Concrete, Site-Cast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry, Finish Carpentry, Architectural Woodwork, Architectural Wood Casework.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Wood Doors, Plastic Doors, Windows, Hardware, Glazing, Louvers and Vents.
Division 09 -	Finishes, Plaster and Gypsum Board, Ceilings, Carpeting, Painting and Coating.
Division 10 -	Specialties, Toilet, Bath, and Laundry Accessories.
Division 11 -	Equipment, Residential Equipment, Residential Appliances.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures, Residential Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Lighting.
Division 27 -	Communications, Structured Cabling.
Division 31 -	Earthwork, Grading, Excavation and Fill, Earthwork Methods, Soil Treatment.
Division 32 -	Exterior Improvements, Flexible Paving, Irrigation, Planting, Turf and Grasses.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Electrical Utilities, Communications Utilities.