Similar Projects
| Reported | 12/08/2021 12:00 AM |
| Project Title | Category 2 E-Rate-Cabling and Infrastructure |
| Physical Address | View project details and contacts |
| City, State (County) | Rio Rancho, NM (Sandoval County) |
| Category(s) | Single Trades |
| Sub-Category(s) | Security/Communications, Service/Term Contracts |
| Contracting Method | Competitive Bids. |
| Project Status | Request for Proposals (RFPs) |
| Bids Due | View project details and contacts |
| Estimated Value | |
| Plans Available from | Municipal Agency |
| Owner | View project details and contacts |
| Architect | View project details and contacts |
| Description | WAP installation steps 1. Verify network patch can be installed within vicinity of the WAP diagram location 2. Install communications outlet/network biscuit 3. Run cable to location and terminate both ends 4. Test network drop 5. Install WAP mounting bracket 6. Remove protective packaging from the WAP 7. Verify the correct WAP will be installed in the location marked on the diagram 8. Twist AP onto mounting bracket 9. Patch WAP in on both ends with a black patch cable 10. Verify that the WAP is powering on by looking at the status LED |
||||
| Details |
|
||||
| Bidder's List | View project details and contacts | ||||
| Prospective Bidders | View project details and contacts | ||||
| Project Documents |
 Engineered Spec Sheet  Architectural Plans  Other Documents |
