Similar Projects
Last Updated | 02/28/2022 02:59 PM |
Project Title | Design Build Supply and Install New Splash Pad - Lake Mohegan Park |
Physical Address | View project details and contacts |
City, State (County) | Fairfield, CT 06825 (Fairfield County) |
Category(s) | Heavy and Highway |
Sub-Category(s) | Park/Playground |
Contracting Method | Competitive Bids. |
Project Status | Results |
Bids Due | View project details and contacts |
Estimated Value | |
Plans Available from | Municipal Agency |
Owner | View project details and contacts |
Architect | View project details and contacts |
Description | The Proposer shall be expected to provide all equipment, design, installation and transportation to the site, in accordance with the following requirements: The new splash pad shall be approximately 40-feet by 60-feet in overall size which shall include a dry concrete apron. The Proposer shall be responsible for the design-build, supply and install of the water features to include sprays and/or stream jets, ground features and all appurtenances to operate the system in Lake Mohegan Park The Proposer shall include a site plan that illustrates that the spray pad is appropriately integrated into the surrounding park area. An aerial image of the Lake Mohegan beach area is included as an exhibit to this RFP. The existing splash pad is depicted on the left side of the image. The new splash pad system shall be installed in the same approximate location. The Proposer shall be responsible for obtaining any and all permits necessary for completion of the project. The Proposer shall be responsible to furnish all equipment and labor for the project. The Proposer shall construct a brushed concrete pad with color additives. Include as an alternate, in lieu of a brushed concrete pad surface, pricing for a concrete pad covered by a rubberized surface (ie. Aqua Bond, or other approve equal). The Proposer will construct any sidewalks needed to connect the splash pad to the existing walkway. All exposed splash pad components shall be adequately coated to resist rust and guard against degradation from UV exposure. All splash pad components, heads, spray nozzles and other items shall be constructed of materials resistant to vandalism, deterrent to theft, require special tools for removal and free from degradation in transmitting pressurized, chemically treated, potable water. Components, heads and nozzles constructed of Stainless Steel, Bronze or Red Brass shall be given preference. The Proposer shall install the activation post near the primary entrance to the splash pad. |
||||||||
Details | Park/Playground, New Construction.
|
||||||||
Bidder's List | View project details and contacts | ||||||||
Prospective Bidders | View project details and contacts | ||||||||
Project Documents |
Engineered Spec Sheet Architectural Plans Other Documents |