Bay City WWTP Improvements

The completed Work will provide Owner with various wastewater treatment plant improvements. More specifically, the Project includes, but is not limited to, construction of the following: 1.Rehabilitation of the Cottonwood Creek Lift Station. 2.Rehabilitation of the Influent Trunk Sewer Interceptor with cured-in-place piping and other repair measures as indicated. 3.Rehabilitation of the wastewater treatment plant, including the construction of new facilities and appurtenances, rehabilitation/enhancement of existing facilities and appurtenances, and demolition of existing facilities. Construction of new facilities includes a new influent pump station, new headworks facility, new aeration basins including a new blower facility, a new RAS/WAS sludge pumping station, a new disinfection building with chemical storage, a new non-potable water facility, a new sludge dewatering building, new electrical rooms throughout the plant with electrical distribution, and a new SCADA system throughout the plant. Plant rehabilitation/enhancement items include rehabilitating final clarifiers, rehabilitating the chlorine contact basin, rehabilitating the existing aeration basins into aerated sludge storage tanks, rehabilitation of existing maintenance building, and rehabilitating electrical power distribution. The project includes the demolition of the existing influent pump station, headworks/screening structure, gas chlorine feed building, aerated sludge holding tanks, and miscellaneous additional demolition items throughout the plant (such as but not limited to, yard piping, electrical distribution gear, demolition within the existing blower building, abandonment of the MLSS and RAS Channels at the clarifiers, etc.). The project includes an associated array of piping enhancements and civil/yard enhancements, together with electrical, instrumentation, and control enhancements to develop a complete and functional facility. Also, the project includes measures necessary to maintain operations of the plant throughout the construction process. 4.Construction of a new administration building and demolition of the existing administration building. Direct all questions regarding distribution or design of Contract Documents for this project to Dan Olson, P.E., (201) 390-1469, DNOlson@GarverUSA.com and Tyson Hann, P.E., (979) 307-5843, TOHann@GarverUSA.com. A Proposal must be accompanied by Proposal security made payable to Owner in an amount of 5 percent of Offerors maximum Proposal price and in the form of a cashiers or certified check, or a Proposal Bond (on the form included in the CSP Documents) issued by a surety meeting the requirements of Paragraphs 6.01 of the General Conditions. Owner reserves the right to reject any or all Proposals, including without limitation, nonconforming, nonresponsive, unbalanced, or conditional Proposals. Owner will reject the Proposal of any Offeror that Owner finds, after reasonable inquiry and evaluation, to not be responsible. If Offeror purports to add terms or conditions to its Proposal, takes exception to any provision of the CSP Documents, or attempts to alter the contents of the Contract Documents for purposes of the Proposal, then the Owner will reject the Proposal as nonresponsive; provided that Owner also reserves the right to waive all minor informalities not involving price, time, or changes in the Work. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.

Division 02 -	Existing Conditions, Subsurface Investigation.
Division 03 -	Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing, Metal Fabrications.
Division 06 -	Wood, Plastics, and Composites, Rough Carpentry.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection.
Division 08 -	Openings, Doors and Frames, Windows, Hardware.
Division 09 -	Finishes, Painting and Coating.
Division 10 -	Specialties, Signage, Compartments and Cubicles, Toilet, Bath, and Laundry Accessories, Emergency Aid Specialties, Fire Protection Specialties, Fire Extinguishers, Storage Specialties, Storage Assemblies.
Division 11 -	Equipment, Laboratory Equipment.
Division 12 -	Furnishings.
Division 14 -	Conveying Equipment, Scaffolding.
Division 21 -	Fire Suppression, Fire-Extinguishing Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing, Plumbing Piping, Plumbing Equipment, Plumbing Fixtures.
Division 23 -	Heating, Ventilating, and Air Conditioning (HVAC), Instrumentation and Control for HVAC, HVAC Air Distribution.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting.
Division 27 -	Communications, Structured Cabling, Data Communications, Voice Communications, Audio-Video Systems, Distributed Audio-Video Communications Systems.
Division 28 -	Electronic Safety and Security, Electronic Access Control and Intrusion Detection, Access Control, Intrusion Detection, Electronic Surveillance, Electronic Detection and Alarm.
Division 31 -	Earthwork, Earthwork Methods.
Division 32 -	Exterior Improvements, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Fences and Gates, Turf and Grasses.
Division 33 -	Utilities, Common Work Results for Utilities, Water Utilities, Water Utility Distribution Equipment, Water Utility Pumping Stations, Wastewater Utility Pumping Stations, Sanitary Utility Sewerage Force Mains, Storm Drainage Utilities, Electrical Utilities, Communications Utilities.
Division 40 -	Process Integration, Water Process Piping.
Division 44 -	Pollution and Waste Control Equipment, Common Work Results for Pollution and Waste Control Equipment, Air Pollution Control, Noise Pollution Control, Odor Control, Water Pollution Control Equipment, Solid Waste Control and Reuse, Waste Thermal Processing Equipment, Fluidized Bed Combustion Equipment, Rotary Kiln Incinerators, Pyrolysis Equipment, Hazardous Waste and Medical Waste Incinerators, Heat Recovery Equipment for Waste Thermal Processing, Synthesis Gas Cleanup and Handling Equipment.
Division 45 -	Industry-Specific Manufacturing Equipment.
Division 46 -	Water and Wastewater Equipment.