Fire Rescue Station 48 - Bay Door Replacement

a. Remove and properly dispose of four (4) overhead bay doors, including all appurtenances. Reference Exhibits “1” - “6” for replacement requirements b. Execute work in a manner to protect adjacent equipment and other existing items against damage. c. Disconnect electrical power, entrapment protection, push-button and remote control connections. d. Remove complete overhead door assembly to include panels, track, rollers, motor, torsion shaft assembly, trolley and push-button controls. All removed components shall be properly disposed of away from the property each day. All overhead doors are to be replaced by the end of the day so that the openings are not left open overnight. e. Furnish and install four (4) new overhead bay doors, Stormtite 625 Series Insulated Service Door (or PBC approved equal) reference Exhibit “1”. f. Install new overhead door assembly to include new track, rollers, operating motor, and trolley assembly, torsion shaft assembly with new spring, hinges, and fixtures; reference Exhibit “2”. g. Connect power supply, all push button controls to the corresponding door. Install and connect new remote control units and install entrapment protection assemblies. h. Coordinate installation of electrical service. Complete power and control wiring from disconnect to unit components. i. The master (emergency) lift button on the wall must be connected to all doors for emergency engine response as it is now. This must be tested after each new door is installed.

Division 08 -

Openings, Doors and Frames, Windows.