Similar Projects
Apron Rejuvenation
Infrastructure
Bidding
Pine Mountain, GA 31822

Runway Pavement Rehabilitation
Post-Bid
Cartersville, GA

Airfield Pavement Rehabilitation
Post-Bid
Hazlehurst, GA

Runway 11- 29 Seal Coat, Crack Seal, and Remarking Project
Results
$150,000 to $225,000 est. value
Wrens, GA 30818

Ramp 19 and Taxilane A3 Pavement Replacement
Results
Atlanta, GA 30303

Runway 02 Safety Area Improvements including Survey and Drainage Improvements
Post-Bid
Fitzgerald, GA 31750

Runway 2 Safety Area Improvements
Results
Less than $1,246,199 est. value
Rome, GA 30165

Primary Surface Obstructions Removal
Post-Bid
Nashville, GA 31639

Taxiway F, South Apron and Taxilane Rehabilitation
Results
Augusta, GA 30901

Westside Aviation Tract W-3 Development
Post-Bid
Atlanta, GA 30341

Taxiway A Reconstruction and Realignment Project
Results
Athens, GA 30603

Airport Taxiway Rehabilitation
Post-Bid
Less than $1,700,000 est. value
Statesboro, GA 30461

Gwinnett County Runway Rehabilitation Project
Results
Lawrenceville, GA 30042

Runway 16-34 and Taxiway Improvements
Post-Bid
Tifton, GA 31793

Runway Incursion Mitigation - PDK 11 - Taxiway Improvements
Results
Decatur, GA 30030

Last Updated 09/20/2021 10:47 AM
Project Title

Crack Seal and Remark Runway 4/22

Physical Address View project details and contacts
City, State (County) Valdosta, GA   (Lowndes County)
Category(s) Heavy and Highway
Sub-Category(s) Runways/Taxiways
Contracting Method Competitive Bids.
Project Status Results
Bids Due View project details and contacts
Estimated Value
Plans Available from
Owner View project details and contacts
Architect View project details and contacts
Description

This project is to prepare, crack seal and remark approximately 5,000' of Runway 4/22 at the Valdosta Regional Airport. The portion of the runway northeast of and including "22" will be milled and replaced by a separate project and is not included in this project. Bidders are invited to perform a site visit to determine quantities of crack seal required. Approximate paint requirements: 44,250 sq ft of TT-P-1952F Type III white reflective paint 300 sq ft of TT-P-1952F Type III yellow reflective paint 17,000 sq ft of black non-reflective paint Beads for reflectivity shall be TT-B-1352D Type III Project shall conform to FAA Specification P-620

Details

Division 31 - Earthwork, Grading, Earthwork Methods.
Division 32 - Exterior Improvements, Flexible Paving, Rigid Paving, Paving Specialties, Pavement Markings, Fences and Gates, Turf and Grasses.
Division 34 - Transportation, Airfield Signaling and Control Equipment.

Bidder's List View project details and contacts
Prospective Bidders View project details and contacts
Project Documents
 Engineered Spec Sheet
 Architectural Plans
 Other Documents