RFP D/B - Replacement of Recycling Building

o To construct an uninsulated 40'L x 37'W free span building, to house the collection of recyclables i.e. Used Oil, Electronics, Aluminum cans, Tin Cans, and Glass. o Structure will be attached at the gable end to the existing 24'L x 24'W baling building. o Structure will be constructed on existing concrete slab. o Structure will have minimum of a 10.6'H headroom height for access of skid steer to move collection bins in and out of the structure. o Minimum of two (2) 10'6"'H x 10'W overhead doors. o Along the long wall to have 4 support post for east side, with shed roof overhang of a minimum of 13' to provide weather protection for patrons to deposit recyclables into collection bins. Shed roof overhang to have 8' high head room, supported by support posts in alignment with wall support posts. o Exterior to have Asphalt shingle roofing, exterior siding, trim and doors to be low maintenance materials i.e. metal, vinyl, plastics etc. o Interior-uninsulated and unsheathed walls, with strapped ceiling. o Electrical- wired to GFI outlets, and LED lighting. o Submission to include a design, sketch, and materials types, list and costs. o Sketch - Not to Scale Appendix A The Town of Alton, NH is soliciting proposals from qualified contractors interested in providing design and construction services for Replacement of 40' x 37' Recycling building. Acquiring from a different source could mean that this document has been superseded by a later version. The Town is not responsible for any reader's failure to heed this notice. Any addendums and clarifications issued for this RFP will be posted on the Townwebsite. General questions, requests for information and responses to this RFP shall be addressed to: Scott Kinmond, CPM Director of Public Works dpwdirector@alton.nh.gov 603-875-6808 - Office. Emailed Proposals shall have "Replacement of 40' x 37' Recycling building Project" in the subject line. Accepted proposals will be opened on March 16, 2023, at 2:00 pm, at the Alton Town Hall. The Town of Alton reserves the right to reject any and all submittals. This RFP does not obligate the Town to pay any cost incurred by respondents in the preparation and submission of a response nor does it obligate the Town to accept or contract for any expressed or implied work. Email address: (stacy@alton.nh.gov) Mailing address, Town of Alton, P.O. Box 659, Alton, NH 03809.

Division 03 -	Concrete, Concrete Forming, Cast-in-Place Concrete, Precast Concrete.
Division 04 -	Masonry, Unit Masonry.
Division 05 -	Metals, Structural Metal Framing.
Division 06 -	Wood, Plastics, and Composites.
Division 07 -	Thermal and Moisture Protection, Dampproofing and Waterproofing, Thermal Protection, Weather Barriers.
Division 08 -	Openings, Doors and Frames, Coiling Doors and Grilles, Windows.
Division 09 -	Finishes.
Division 10 -	Specialties, Signage, Fire Protection Specialties.
Division 11 -	Equipment, Loading Dock Equipment, Loading Dock Bumpers, Stationary Loading Dock Equipment, Portable Dock Equipment, Loading Dock Lights.
Division 21 -	Fire Suppression, Instrumentation and Control for Fire-Suppression Systems.
Division 22 -	Plumbing, Instrumentation and Control for Plumbing.
Division 26 -	Electrical, Instrumentation and Control for Electrical Systems, Interior Lighting, Emergency Lighting, Exit Signs, Exterior Lighting, Lighting Poles and Standards, Parking Lighting, Flood Lighting.
Division 27 -	Communications.
Division 31 -	Earthwork, Site Clearing, Clearing and Grubbing, Grading.
Division 32 -	Exterior Improvements, Bases, Ballasts, and Paving, Flexible Paving, Rigid Paving, Curbs, Gutters, Sidewalks, and Driveways, Paving Specialties, Pavement Markings, Fences and Gates, Screening Devices.
Division 33 -	Utilities, Water Utilities, Sanitary Sewerage Utilities, Storm Drainage Utilities.