7110--Outpatient Lobby Seating to Match Existing Furniture.

SCOPE OF WORK: Overview This project will consist primarily of receiving, delivery and installation of waiting room guest chairs for outpatient lobbies in Building 100 on floors 1st, 2nd and 5th to match existing. All work is to be completed during regular business hours. The Contractor shall submit an estimated schedule for delivery and installation. The Contractor shall be responsible for any damage to the furniture that occurs due to Contractor/freight error or neglect. The Contractor will be responsible for the coordination for delivery, receiving and installation to the VAMC, as well as all debris removal from the project site. VAMC will provide the dumpsters needed for project related trash and recyclables, the Contractor is responsible to transport and properly dispose of all trash and recyclables from the project site. Scope The project consists of purchase, receiving, and delivery of 185 guest chairs and 11 bariatric chairs as follows: Caterina Upholstered Back Caterina Slat Back Valdina Bariatric Guest Chairs: Standard Chairs/Upholstered Back - (125 total) 350lb weight capacity; 33.75 high x 23.5 wide x 24.5 deep with 25 arm height, Kwalu Caterina Guest Chair Model CTE21; Upholstered Back style, with wall-saver back legs, a steel reinforced joint system, with integral antimicrobial product protection or equal guest chairs. Guest Chairs: Standard Chairs/Slat Back - (60 total) 350lb weight capacity; 33.75 high x 23.5 wide x 24.5 deep with 25 arm height, Kwalu Caterina Guest Chair Model CTE11; Slat Back style, with wall-saver back legs, a steel reinforced joint system, with integral antimicrobial product protection or equal guest chairs. Bariatric Chairs - (11 total) 500lb weight capacity; 35 high x 34 wide x 27 deep with 26 arm height, Kwalu Valdina Short Back Bariatric Chair Model VDNB11 with a steel reinforced joint system, wall-saver back legs and integral antimicrobial product protection or equal guest chairs. Fabrics/Finish Selections: All Frame Colors shall be Kwalu Light Walnut Classic Color or equal . Floor Product Slat Back/Uphol Seat Uphol Back Uphol Seat Bari Seat & Back Qty        1st (Blue): SCI Caterina Upholstered Back  ArcCom: Sea Willow, AC-62360, color Sky #11 Stinson: Montana, MTA89 Burro  10 1st (Blue): SCI Caterina Slat Back ArcCom: Sea Willow, AC-62360, color Sky #11    5 1st (Blue): SCI Valdina Bariatric    Architex: Mantel, color- Density 0        1st (Red): Emergency Room Caterina Upholstered Back  Stinson: (Patty Madden) Vortexia/SOF-VOR-05/Venice ArcCom: Drifter/AC-63613/Stone #4  60 1st (Red): Emergency Room Caterina Slat Back Stinson: (Patty Madden) Vortexia/SOF-VOR-05/Venice    30 1st (Red): Emergency Room Valdina Bariatric    Architex: Mantle/Density 6        2nd (Blue): Neurology Caterina Upholstered Back  ArcCom: Spin, AC-61765, color #6 Sky ArcCom: Silverado, AC-6766, color - #17 Nugget  30 2nd (Blue): Neurology Caterina Slat Back ArcCom: Spin, AC-61765, color #6 Sky  15 2nd (Blue): Neurology Valdina Bariatric    Stinson: Diva, DVA50, color- Gala 4        5th (Green): Surgical Clinic (5C) Caterina Upholstered Back  Stinson: (Patty Madden) Bubble/SOF-BUB-07/Yuzu ArcCom: Pebble Beach/AC-66540/Lime #11  25 5th (Green): Surgical Clinic (5C) Caterina Slat Back Stinson: (Patty Madden) Bubble/SOF-BUB-07/Yuzu   10 5th (Green): Surgical Clinic (5C) Valdina Bariatric    ArcCom: Drifter/AC-63624/Avocado #15 1         TOTALS      Caterina Upholstered Back 125      Caterina Slat Back 60      Valdina Bariatric 11     Lobby guest chairs in outpatient clinic lobby areas shall be of the quality and transitional style type of Kwalu Caterina and Valdina Series guest chairs, vinyl upholstered seat and back and some with a slat back for variation. Guest chairs (standard and bariatric) shall have the ability to be re-upholstered as or if needed at an off-site upholstery shop. Guest chairs shall be rated for 24/7 healthcare use. Guest chairs shall be easy to clean and sanitize, light weight enough to move as needed for floor cleaning purposes and shall carry a 10-year performance warranty on construction, finish and anti-microbial product protection. Upholstery must meet be Class 1 in accordance to NFPA 260: Standard Methods of Tests and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture. Frame Construction & Cleaning: The chair frame shall be made up of high-density polyurethane with steel-reinforced joints and stress points. Bariatric chair frame shall be made of high-density polyurethane with solid steel frame that must be capable of safely holding up to 500 pounds of weight. The finish shall be 1/8 thick, patented high-impact resistant repairable polymer, that is scuff-, scratch-, and water resistant. Finish has an imbedded anti-microbial agent that permeates the entire product, not just a topical coating, to provide adequate product protection to inhibit the growth of a broad spectrum of odor-causing bacteria, and protect the chair framework from stains and product deterioration over time. Finish must have the ability to be thoroughly cleansed with most water-based or water-soluble cleaning system and sanitizing solutions commonly used in healthcare and senior living environments, without compromising the antimicrobial product protection properties or damaging the finish. (US Patent No. 5,067,842). Chair frame shall be resistant to most organic solvents or compounds such as ammonia, gasoline, white spirits, paraffin, both mineral and vegetable oils, animal fats, fruit pulp, grape acid, castor oil, blood, all body waste, lipstick, shoe polish, and salt water. Chair frame shall demonstrate an excellent resistance to acids, bases and oils. Legs/Glides: Legs shall have metal knock-in Teflon cap glides. Seat: Features cleanout All upholstery materials meet the requirements of California Technical Bulletin #117 Seat frame is constructed of ¾ plywood with elastic webbing band. Back: Back frame constructed of ¾ plywood covered with cardboard. Back is attached to the arms using 1 screw flat square. Cushioning: Seat and back cushion shall be plywood frame upholstered with 2 hard foam (1st layer), ½ hard foam (2nd layer) and ½ hard foam on the band sides and top. Testing: Shall be capable of safely holding up to 350/500 pounds of weight or the bariatric and endure the most rigorous testing standards to provide supreme strength and safety for each user. ***Manufacturer is Kwalu Designed to Last Furniture or Equal- FAR 52.211-6 Brand Name or Equal***

Division 12 -

Furnishings.